Interior wood doors - bring to mind the budgetary disc

If the doorways in the house of non-standard, and even in large quantities, custom doors in the profile organizations will result in a tangible amount for the budget. When the extra money, but there are skilled hands and the desire they have to work, there is a real opportunity to save money by spending "tuning" a cheap model of the web. This is what one of the participants of the portal FORUMHOUSE, and his experience could be useful to many.

source

There is a house in which, after the repair, you must install ten of interior doors in the opening height of 190 cm. Handling order to pro "threatened" a decent amount, forcing to look for alternatives. Kormashov I found acceptable to his decision in hypermarkets.

Kormashov (User FORUMHOUSE):

If the order in the company, the price tag on my door set without accessories is growing to the size of 45-50 thousand. For me it is good money, so looking for other options. And then I came across the door from pine array, finishing with 1,100 rubles per sheet. For me, their plus is that I can own their crop and adjust to the necessary size for me.

Doors, referred to constitute a frame cross member and a panel shaped, generally a light color. In the original version of the web to view quite unpresentable and require serious debugging. KormashovHe decided that he wanted to get an imitation wenge.

he process technology too familiar:

• Start grinding (secondary grain).
• Caulking - the presence of defects (normally they are present on each leaf).
• Brushed (lung, bulking and texture).
• Padding.
• Intermediate sanding (to remove zadrala fiber).
• Coating stain (to give a desired hue).
• Padding.
• The finish grinding after drying stain.
• Varnishing (first layer).
• Polishing.
• Finish varnishing.

Since learning is never too late, and the collective intelligence of efficiency, rational criticism and tips Kormashov I asked the other members of the portal, see doors. In general, the selected option is OK, but with some fine-tuning, valuable advice on the topic given by experienced members of portal - joiner-carpenter and DIYMan.

excerpt - cheap fabric made of an array of high humidity, substantially crude, however as the drying may be significant deformation. As a result of shrinkage of the panels come out of the grooves and become visible unpainted areas, and warp frame door does not add beauty.

To avoid such "bonuses", before treating fabrics it is recommended to keep at room temperature, if possible - a month.

During drying, the web is to be fixed - in clamps or a press. Several canvases piled stack on a flat surface and press down from above. If you do not, the door could "story."

Training - on budgetary door is not only crude but also an array of low-grade with a lot of knots and "pockets" - cavities in which collects resin. Black knots are drilled, as they can fall further, and the resin is opened pockets clean out the resin and treated with turpentine. If the problem is not always pops knots, the ugly tar drips spoiling the whole look - typical for the doors of the low-cost segment. Getting rid of this scourge - the process laborious and long, but the result will justify itself.

Another piece of advice - do not prime the wood before the moraine, the composition must penetrate as deeply as possible, and reduces the permeability of the soil.

And to emphasize the texture of wood and wenge simulate can not only light brushing, but also by color, if you use the conventional double-sided sponge for washing dishes as did DIYMan.

DIYMan (User FORUMHOUSE):

I did so dark brown first layer - either stain (if two layers may be required), or paint. After drying filmed raise the nap, again painted as needed. After receiving the optimal first layer took varnish, it interfered with the black color scheme and gets in a continuous thin layer - paints of dark brown-black. Then the rough side of a sponge, gently, without fanaticism, suggests texture - easy passage without pressure gives the band, both on the fibers. Creative process, and every product receives a unique, on wenge pretty similar, you can get a good hit if desired.

Treatment

Since the openings of Default custom, before the treatment he dismantled the door, cut to the desired size, glued. The original technology was transformed slightly as the door wenge households seemed too dark. Therefore we stopped at any tinting lacquer under the tick with the release of a golden edge. As shown, a conventional filler shines through the topcoat paint. I had to correct flaws and scraping putty acrylic color tinting, simultaneously repeating the steps of grinding and polishing. To select a panel, Kormashov used spray gold paint, which plays in the light.

Around the same way from a typical cloth made and attractive door Nikan21Only he used a special wood oil.

Nikan21 (User FORUMHOUSE):

Panels in oil, not afraid of water, two brush gets colored oil layer. Before that, primed, I walked a little sandpaper sponge-like.

Use oil instead of varnish to get a matte texture, and advises carpenter-master, And it also provides recommendations on method of application.

joiner master (User FORUMHOUSE):

After sanding, apply stain and stiff brush oil, abundant, but without forming puddles on the canvas. Ten minutes later begin to rub the whole thing with a cloth, preferably - a lint-free cotton. The next day, a little sandpaper minute runs, and you can just dip a cloth in oil and rub on the door again, without puddles. The next day, can be polished - either by hand or power tool with a felt head.

Update enough oil coating once a year, by means of polishing.

As for the fixture, Kormashov It uses a loop-butterflies they attract it easy to install. But that they support the weight, put on one sheet recommends three. Wherein the top and bottom are set at a distance of 20-25 cm from the edge of the web, and the third holder is mounted to ten centimeters below the top.

Do take advantage of the proposed method, or not bother and buy / order ready-made door, decide for yourself. But as an option, enabling solid savings and at the same time show their own talents, transformation featureless blanks quite viable. If the zone is not the availability of hypermarkets like door blanks can be found on construction markets or bases. In any case, their purchase and the cost of finishing will cost several times cheaper than ready-made models.

What tools should be at home carpenter, told in an article about furniture shop. To represent how to behave in the wood, it is necessary to read the material about the features of different varieties. When there is no ability or desire to mess around on their own, reliable performers can be found at Exchange FORUMHOSE.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!