Simple and inexpensive ways to seal the gap between the bathtub and the wall.

sometimes allonly a small gap between the bathtub and the wallcan give a lotissues from of mold and mold behind the bathroom and finishing flooding neighbors below.

therefore take care of the gap sealing must even during the repair in the bathroom.

Then the best option would be to lay tile after installation of the bathThey made her the lower row on the ledge.

But what if the repairs have been completed, and a small gap still remains.

Get help simple waysBy which you can close up the gap without resorting to specialists, and thus inexpensively. What kind? Consider the following.

Silicone sealant.

Through sanitary silicone sealant you can simply and securely seal the gap between the bathtub and the wall without additional elements decoration seam.

But there is one condition. This method is suitable only when the size of the gap is not more than 5 mm.

Before applying the sealant surface without fail must be cleaned and degreased.

And to get a neat seam, Immediately after the sealant is applied, it should be finger smoothed dipped in a soap solution.

Polyurethane foam.

If a the gap between the bathtub and the wall a few centimeters, Then close the junction can be using the foam.

Before its application it is desirable to seal the adjacent to slit portions masking tapeBecause the foam is hard to remove.

zapenennuyu just can not leave a gap, in any case it should be zagermitezirovat silicone or close the fascia strip.

Curbing tape.

Using curb tape as it is quite simple and budget way to close the gap between the bathtub and the wall.

But unfortunately, It loses its attractive appearance and fast enough in 1-2 years it will have to change.