The simplest way to mask the gap and chipped at unsuccessful docking casings.

When installing the casingsthe most difficult and crucial stage is their washed down at an angle, especially 45 degrees.

Do it accurately and precisely not always obtained. From mistakes no one is immune.

As a result, when joining architraves formed unsightly gap. They immediately catch the eye and spoil the appearance of the door unit installed in general.

So the question arises immediately: "How to fix it?".

Of course it is possible, just buy a new set of casings.

But the rush is not worth it, because unsightly cracks and small chips can very fast and easy to disguise. How? Consider the following.

Mask minor defects resulting when joining architraves can two ways.

The first and easiestIn my view, the way it is - masking using wax crayons.

Now in stores is a wide range of wax crayons of different colors.

must choose a crayon color suitable for platbands and paint them a slot (Movement of the hand should be across the gap).

Then with a dry cotton cloth to remove excess wax and polish surface in a circular motion.

The second method for masking gaps an unsuccessful docking casings as simple, but it is more financial costs.

In order to eliminate unsightly gaps can be used tinted sealer, picking up his color.

slit is filled with sealant using gun, And the excess removed a rubber trowel and a damp sponge.

But buying the sealant just for the sake of disguise several slits not profitable. Its value is several times higher wax crayons.

Therefore, the first method is much easier and cheaper.