How you arrange the joint between the wallpaper and tiles in the kitchen apron.

Despite the appearance of alternatives more often finish the repair of the kitchen usedfor the walls wallpaper, but everything forapronceramic tile.

And everything is good, but when joining these materials, particularly in a conspicuous place, the question often arises: "How to make the transition from tile to wallpapernice?".

On this question there Multiple answers.

One of them is discussed below.

The easiest way to arrange the junction of two of these materials, it is Institution wallpaper or tiles under it. This option is often used, but it does have two significant shortage.

At firstEventually grease and dirt accumulate on the ground connections and clear it is not so easy.

Secondly, Tile end often does not look attractive, and it still has to refine.

but there way of, which allows you arrange the junction of wallpaper and tiles without these problems.

Through metal corner It can be done beautiful frame of the kitchen apron and wherein close unsightly seam.

Important! When choosing a metal angle must consider not only the tile thickness, but the thickness of the adhesive. otherwise will slit between the area and wallpaper.

First we need to to partition.

For this metal corners are putting on the perimeter to the tile and use the pen mark up.

Docking angles produce at an angle of 45 degrees. Zapilivaem via their end saw or tool - stuslo.

Then We proceed to the fixing of metal parts to-end ceramic tiles.

To do this with the help of a gun put on corner (Center) with step 5 cm"liquid Nails".

After applying the adhesive area is pressed against the end face of the tiles and fix with masking tape.