Clearing the blockage of water pipe

To prevent the occurrence of clogging in the water pipe, it is necessary to carry out prevention. First, use the feeds for a bath and sink holes. Secondly, it is necessary at least once a month to wash the tub or sink with boiling water. If, nevertheless, they are clogged, you should clean using a plunger.

Close the drain opening plunger and fill the sink with water at 15 - 20 centimeters. Then the plunger slightly raised, lower it down quickly to push the water with debris. Such action is necessary to make several times to clean the bowl of a small blockage.

In order to clear a clog resistant, use a highly concentrated solution or soda lye. Before using the plunger from the shell must scoop water and pour for a few hours the solution. After that, pour boiling water and operate plunger.

In that case, if you can not get rid of the blockage using the above methods, it is necessary to remove the siphon and clean hard wire.