How beautifully and quickly place the joint between the bathtub and the wall with his hands.

establish bath close to the wall without the formation of cracks extremely difficult. It is always a small gapWhich must always be sealed.

I had often the gap between the bathtub and the wall sealed with the grout. Now for this purpose usually use silicone sealant or assembly foam.

All these methods are well cope with the problem, but slit looks after such operations unaesthetic.

The solution is easy, and most importantly fast.

enough junction between the bath and the wall you arrange. How? Consider the following.

Make the joint between the bathroom wall and an attractive appearance can be quickly, easily and with the help of the budget curb tape.

It acts not only as decorative elements but also well protects the slit against unwanted leaks of water and the formation of mold.

Stick Curbing tape can be quite their own hands.

To do this, you first need to surfaces that are close to the junction, clean of pollution and degrease with an alcohol.

In this case, an inexpensive pharmaceutical preparation was used "Aseptolin", which contains in its composition the alcohol with various additives.

After the surface next to the seam dried, can be proceed directly to the gluing tape.

To do this, measure off and cut the tape to the desired dimensions.

Wherein, once completely removed all backing paper with belt not worth it, since the probability is high that it slipnetsya.

To paste the need to curb gradually shoot 5-10 cm protective paper and tape tightly pressed with a cloth first against the wall, and then to the bath rim.

In order to achieve more strong fixation Curbing tape over the entire surface need warm upthrough ordinary dryer.

After installation, use the bathroom is not recommended during 24 hours.