Simple and cheap "antiquated" way to eliminate squeaking door hinges.

Sooner or later, all the doors opening and closing begincreakThat is usually the order annoying.

Most often, the perpetrators of this unpleasant phenomenon are doorloop. More specifically, lack of or insufficient lubrication in them.

You just need to get rid of the annoying squeak lubricate hinges.

This can be done via WD-40 or other lubricants (e.g., engine oil). But they are not always at hand.

Still our grandfathers We solved this problem more simple, fast and does not require any extra financial cost method. How? Consider the following.

To eliminate squeaking door hinges will use ordinary simple "soft" pencil. Or rather it lead.

It consists of graphiteWhich provides good slip due to oil and wax in its composition, as well as perfectly protects the metal from corrosion.

We begin the process of sharpening a pencil. It should be possible to release the lead from the wooden frames.

Then gently raise a little door (in this case, remove the door leaf is not completely necessary).

The resulting gap between the hinge insert a pencil lead, the door leaf returns to its original position. Lead pencil breaks off at the same time.

Also, if desired, can lead chop and already the finished powder Pour into the gap.

Under the weight of the door leaf pencil crumble.

For a complete and uniform distribution of graphite on surface loops necessary several times to open and close the door.

So simply, quickly and inexpensively you can lubricate the hinges and get rid of the unpleasant creaking.