How to make a simple and inexpensive wooden table with his hands.

burial place of his relatives usually try to ennoble. Table and bench in this respect, perhaps, it has become traditional attributes.

Currently, you can buy and install a table from a variety of durable materials such as stone, metal or concrete.

But the cost of such products is quite high and not always afford.

If the table is not possible to buy, it does not matter. It is quite possible to make their own hands. How? Consider the following.

For the manufacture of the table will be used wood planks 50*100.

to do countertop with a hacksaw saw off the board length 95 cm in the amount of 4 pieces and fastening them with two cross bars with nails and a hammer.

As support (Feet) table will use timber 100*100.

Convenient to transport the table disassembled, etc.oetomu collect it will be on-site installation.

To do this, using shovels We dig a hole depth of 0.5 meters and install the center beam.

Before you put in the ground support process it mastic or used oil to prevent the rapid decay of the wood.

To secure the support for timber perimeter obkladyvayut stones (bricks) and tightly tamping, covered with earth.

the countertop is then placed on top and fixed beams nailed. To provide additional stiffness the two sides under the table top fastened jib.

To the table served longer necessarily it is treated impregnated or paint.