How to easily make a neat silicone seam with his own hands.

Grouting, gaps and cracks with silicone sealant typically completes the process of finishing. In many ways, it is on how much quality and nicely made silicone seam depends on the impression of the work as a whole.

Therefore, it is important that the silicone seam is smooth and accurate.

Make it so you can quickly and easily by hand. The main thing to know a little trick and process technology. On them will be discussed below.

Process sealing seam must begin with the preparation of silicone deposition space. It should be clean, dry and free of grease.

Once the surface is prepared, proceed to fill the seam with silicone sealant.

Slowly and evenly pressing on the handle construction gun to put the silicone along the seam. It is necessary to try to fill the maximum interior space and sealant gap as possible not to interrupt the coating process.

The silicone sealant has viscous and sticky structure. It perfectly adheres to the dry surfaces and is very difficult to remove. Therefore, to the formation of seam avoid soiling the surrounding surface, apply one small trick.

It consists in that the surface next to the seam and the seam itself directly after the application of silicone be wetted soap solution.

For the formation of the seam can use ready-made brand spatula or do it by hand. But it is more convenient and easier to make smooth the seam with your finger.

The finger should be wetted with soapy water and remove excess sealant. That's how easy and simple it is to make a neat seam with his own hands.