How to easily repair the damaged section of linoleum without replacing the entire web.

Linoleum damage during the operation, it is quite a common problem. Most often defects occur when moving heavy furniture, in the fall of sharp objects or cigarette ashes on the cover.

Caused damage not only spoil the appearance of the floor covering, but also contribute to the ingress of moisture under linoleum. Which can then lead to the development of the fungus. Therefore, the defect must be eliminated as soon as possible. This can be done simply with their hands enough, the replacement of the entire fabric would be required. How? Consider the following.

Repair of the damaged portion of linoleum will produce via latki (a piece of linoleum) identical in color, texture and pattern of the floor covering.

After laying linoleum are always extra pieces that are usually stored. If they do not have to look for a suitable piece of linoleum in DIY stores.

Once the desired piece of linoleum found, cut a patch out of it the size of a little more of the damaged area.

Then put the patch to the damaged top floor covering portion and with a sharp knife and stationery level (or range) once erupt two layers of linoleum.

Remove the pieces of linoleum and preparing a base (cleaned from dust gruntuem). Then apply the patch on the cold welding of the edges, the lower side and inserted into the cut position. With a rag wipe the remnants of glue and press down with a heavy object for a few days.

In this repair process is complete.