Rules and guidelines for electrical safety during maintenance work

Any work with electricity - is an undoubted risk and we can not make mistakes, because electricity does not forgive them. In this article I want to give you the 10 main rules - recommendations how to carry out repair work related to electricity.

Regulations - Recommendations

Unfortunately, the majority of accidents occur due to excessive self-confidence, or because of a trivial negligence, as well as due to lack of skills and knowledge.

Attention. All work on the electricity associated with the risk. If you lack knowledge or skills, please refer to a specialist.

A set of rules presented below will allow you to avoid unnecessary injuries:

1. Before you start, be sure to check whether the circuit is dead, where you are going to carry out work. Never assume that your workplace energized priori.

2. If you doubt that you can do the job, or you have any questions, be sure to consult a specialist. Lack of knowledge and skills can lead to errors, which can bring irreparable harm to your health or damage to your property.

3. In no case do not get to work, if the work area is poor (lack of) lighting. It is better to take a few minutes to find and install additional lamp, than the dark will not notice any important detail.

4. Do not attempt to carry out work, if your skin or wet clothing. Also make sure that your shoes were dry, if you want to enclose dry boards for insulation or use a dielectric mat.

5. In the production, use only tried and tested tool. At home, make sure that your work tool has no external defects and was always clean.

Remember! Dirt excellent conductor of electricity.

6. During operation, remove the hand bracelets with hands and do not wear loose clothing that could get tangled during operation. Long hair stack so that they do not interfere with your work and do not have to constantly correct.

7. If it so happened that caught fire, such as a junction box, do not attempt to extinguish it with water, snow, and so on. N. Only use fire extinguishers. If they do not, just call the fire and do not do anything with a burning shield.

8. You should always know where the switching devices (switches, automatic circuit breakers, and so on. N.). They also need to be signed by all.

9. Always check the availability and serviceability of grounding. Remember that quality grounding can save a life.

10. Constantly improve their knowledge of electrical safety.

These are the basic rules and recommendations, which will allow you to perform various tasks related to electricity safely as possible. If you liked the article, you will appreciate her huskies and thank you for your attention!