German approach to the pre-fabricated housing: CLT panel

The foreign method of rapid construction of the house

The rate of construction of boxes at home is often put at the forefront. This allows you to quickly do finish and enter the house in the shortest time. When it comes to fast and all-season building, the first thing that comes to mind - frame technology. Despite the merits, it is not without drawbacks. For example, a lack of quality of lumber strict geometry makes it necessary to engage planks bringing to mind independently. Or overpay for planed boards drying chamber.

Identify all the advantages of wood and neutralize its disadvantages offer Austrian engineers have developed a technology Construction of houses from CLT panels (Cross Laminated Timber), m. F. - Cross glued wooden slats.

According to the developers, it allows you to build a house in a short time, to save on finishing, as well as reduce the cost of construction, that is. to. a similar structure is not required to build a strong foundation. In connection with this interesting experience of German builders, who decided to build on this technique area of ​​175 square meters building. m.

Nick Frank

In our architectural office approached by a customer who is planning to build a home office on a site in the suburbs. The task was complicated by the fact that conduct large-scale excavation or construction work in densely inhabited areas would not have happened. In addition, the developer wanted to build a modern building with a maximum area of ​​glazing and unsupported spans in the shortest possible time. Thought, we decided thatCLT panels - the best option.

Work has begun to boil. Bay foundation slab, Working with the help of a crane, started installation of the panels. The structure grew before our eyes, and the whole process of assembly "box" took a few days at home.

At the speed of effect that all window and door openings, communications and engineering tracks laid in the panel still at the stage of their production in the factory.

Panels withstand tremendous load, so there is no need to use carriers scaffolds and other power components.

In fact, the building is going on the principle designer of the same material, and all panels - wall, floor and ceiling, are stacked in accordance with the technological map.

Nick Frank

To develop a project on the basis of this material I liked that, that is. To. Are panel the carrier and do not shrink, it is possible to mount the huge panoramic window, without fear that the glass crack. we also save considerably on the finish, stoned house with plywood on the inside. Moreover, it did not begin to paint, leaving it as it is. Although, in principle, the very texture of the wood panels eliminates the need for additional decoration.

The architect admits that such a high-tech design of suit is not for everyone, but for this project it was the best solution.

Besides the technical part, the designers have taken care of the functional structure. The house is divided into certain zones. The first floor allotted an office where the customer operates, the second and third - the private open-plan area, which in future it is planned to allocate to living rooms. Outside House facade sheathed board, Laid horizontally.

FORUMHOUSE on an article, which tells What is the technology «Tilt-up»And how it can help build a stone house. We also recommend material pro-fabricated house in Chinese and nuances aerated concrete masonry on the mounting foam. And in the video shown construction technology at home from a vertical beam.

Subscribe to the channel. Share in social networks. Join FORUMHOUSE.