How to decorate the stove, from painting to facing. real experience

Painting, cladding, painting bricks and other methods of decoration and fireplace stoves

The stove can become an ornament to any one of the intricate interior, and it does not necessarily have to spend a lot of money. This article contains ideas for finishing stoves and fireplaces from the users of the portal, from the most simple and budget, to intricate (man went specifically inspired by the Red Square) and very complex. We like, do not you?

Content

• How to paint the oven
• How to plaster furnace to avoid cracks
• How to paint the bricks
• How to quickly make a beautiful stove

Whitewash and paint

The most budget option to make of the old stove work of art - to whiten it and draw on whitewashing some simple ornament.

Beatrice

Participant FORUMHOUSE

I think it will be very stylish.

Pechevladeltsy sometimes can not be solved at this option because they are afraid of cracks in the whitewashed: immediately end beauty. But in general, these cracks are easily defeated. That's life hacking from our user with the nickname Vladi Mir:

• If the crack appeared to completely eliminate it: pick open the plaster up to the bricks, clean the joints of the brick remains of crumbling clay, as closely as possible to score the crack new solution;
• Plaster furnace reinforcement (hessian, mesh, gauze).
• Plaster without reinforcement in the furnace will always crack because brickwork will expand and contract during heating and cooling cycles. Therefore, you just need to obbit old plaster, putting through a new layer armirovochny, whitewash and paint. Cracks will not.

Plaster will not crack when apply it on a hot stove.

Vladi Mir

Other budget options there. Finishing with stone and tile is worth a lot of money, there are some special heat-resistant mastic are already a lot of money.

The painting is from the cathedral

Our wearer with the nickname Bilibin I was inspired to paint his furnace while walking on Red Square.

Bilibin

Participant FORUMHOUSE

Here is a painting of St. Basil's Cathedral!

Here it is interesting that before painting the oven is not bleached, applied in a pattern directly on the unpainted plaster.

Bilibin

the main thing – plastering on plastic mesh to avoid cracks.

Varnish on brick

Our user with the nickname Locos long considered how to refine the old oven.

I found a very expensive imported terracotta tiles and ready to buy it, but then cleared the oven from the old whitewash and was just delighted that it looks like the old brick. What did he do:

•  punched glass door;
•  perezater masonry joints mixture;
•  all superfluous cleaned with a wire brush;
•  primed;
•  covered seams heat-resistant red-brown enamel;
•  covered door black enamel;
•  on the bricks Apply two coats of heat-resistant varnish.

painted brick

Another option - not plastered oven and varnished bricks and paint them. So did our user with the nickname adi-vrnAnd many saw a good example, wanted to try to paint the bricks of their stoves.

adi-vrn

Member FORUMHOUSE

I took off all plaster Adv seams zater terra cotta colored grout and lime with the addition of black caramel and salt. The result was a great gray.

Furnaces Kruglov

Here are some of the furnaces of our User Pavel Kruglov, a professional stove-maker. Paul - a big fan of the Russian stove, believes that it is much more beautiful and useful than the fireplace.

Pavel Kruglov

Member FORUMHOUSE

Fireplace loses Russian furnace and spectacular plane. When you look like burning wood in the Russian furnace, the flames licking arch on brick arches appear colored stains... and when the wood burn out, the embers remain, their glow is simply mesmerizing.

Another work of Paul: a hybrid of a fireplace and a Russian stove. You can drown as a fireplace, you can - as an oven, and there is still bench and stove and oil lamp on top. All this complex structure is served by a single tube!

Paul believes that this finish can be easily repeated, where a lot of natural stone; its main components - the imagination and performance.

Pavel Kruglov

I'm your furnace cover with acrylic primer. Seams not fall off, easy to clean, and even wipe. But Slavic customs oven must be bleached.

Here is another work of Paul.

Facing brick

Here are some options facing brick fireplace.

Our user with the nickname chairman neatly trimmed with red brick fireplace and the emphasis on decoration cover.

Here is an interesting variant of fireplaces from our participant with the nickname petr038With a wooden shelf (this bar 100x100 mm).

The top bar is not changed by the heat of the fireplace, on the lower lacquer became more opaque. And a half years of operation of the fireplace nothing never cracked, has fallen off and caught fire.

Here is another example of a successful lining of the furnace chimney brickwork.

Spodmv

Member FORUMHOUSE

Here is an example of the execution: a fireplace "Promo 700" VKSM brick dome – in the usual way, faced with granite and stone "Kamrok».

The customer uses the fireplace to heat your home during the offseason (the house is connected to the municipal heating system), operated by 7 years, no complaints.

conclusions

It happens - regularly serves as a stove, censures its functionality is not present, and looks like it is somehow not very much. Here are a few ways to quickly return to its former appeal.

• Remove old plaster to the base plastered again, always with a reinforcing mesh of fiberglass.
• Plaster for the stove needed traditional, from the good old clay and sand.
• The clay must first be cleaned of impurities, soak, and add fine clean sand. To determine the right consistency, you can make a "bead test": roll a ball with a diameter of half a centimeter and a meter-high drop. Flatten the ball - too fat composition, you need to add sand. Ball covered with cracks and bundles - a bit too much sand, add clay.
• Before finishing the oven is better to heat to every possible crack widened, so it will be easier them to close up.
• Whiten.
• Dirty and faded doors need paint heat resistant paint suitable shade. For thermal stability such work has to be not less than 600 degrees.

On FORUMHOUSE you can read an article about where and how to store firewood in the area and how to simplify their procurement and Kolka. Explore with design features Russian furnace. Any furnace information can be found in the section stoves and fireplaces.

Watch our video on how decorated fireplace with his own hands.

Subscribe to the channel. Share in social networks. Join participants FORUMHOUSE!