Winter construction: a trowel, metal frame, the budget of 200 thousand rubles

The story is about how to build an inexpensive winter workshop if: the weather is against it, and the room to work and earn the money you need more "yesterday"

Based on a true story! Construction workshop at -20 degrees Celsius. Perhaps these two sentences best describe FORUMHOUSE user experience with the nickname VMG. Background - the participant portal builds custom boats. The owner of the premises in winter raised the rent for the shop three times. VMG I had to make room, and, with all the tools to go to their site. And we have to work. Time is running out. Standard cabins are not suitable. It will not fit oversized details. Exit? Quickly build a low-cost workshop size 7000h3800 mm. Describe how VMG It succeeded.

Content:

• What is the foundation choose to shop
• How to build a workshop on metal
• How to make the floor in the studio
• How to bring the materials to the site
• Than to sheathe the walls of the workshop
• How warm workshop
• As heat in the winter workshop
• How much cost the construction of a workshop of metal pipes and profiled sheet

Screw pile-foundation for the workshop

Thus, the construction of the workshop VMG He began in the winter. The task - to quickly put the "box". How to do this if:

• It's frosty outside.
• Time is short.
• Concreting disappears.

Exit - to deliver a workshop on the "all-weather" screw piles.

VMG

I bought four piles. Steep yourself. He took off his hammer frozen ground to a depth of 0.3 -. 0.4 m Next came the usual earth. Piles Screw in without any problems. It turned out that one side of the shop stands on stilts, and the other side rests on a concrete platform - the base of the canopy in front of the house.

Frame workshop of metal sheets

During the construction of the workshop everyone chooses his familiar material and technology. For some, it - a wooden frame. For others - gas or foam. VMG working with metal, so he chose the metal profile.

VMG

The basis for the workshop, I cooked from scraps 12th sill. Lags of the profile pipe section 10x5 cm, a wall thickness of 3 mm. Still had to buy profile pipes 50h50h2 mm. Profile cooked on a "platform." The street was -20 ° C. Pipes are covered with snow and ice. Therefore, they could not paint. I think it's - it does not matter, in my age enough and more children will remain.

By the way, t. To. construction budget, the user for 5 thousand. rub. bought b / a window unit. This is the door and the window to the studio. Moreover, the window unit, for a new fact. These units sell buyers of new buildings that extend the balconies and the "throw away" unnecessary glazing. But Sectional Doors VMG advises to buy new. It is - it is cheaper than ordering in size.

Gate size 2500h2390 mm, the user has bought the New Year, while discounts for 20 thousand. rub.

Metal frame, the user is working with an assistant, cooked for 3 days.

Frame quickly set and started assembling a flooring shop.

"Deck" workshop on metal

Chernova workshop floor is made of boards section 15H5 cm. True metal joists, section 10x5 cm, the span of 4800 mm, if the jump, slightly springy. I had VMG enhance their boards section 150h50 mm. User profile fastened them to the bolts.

The rigidity of "deck" has increased. At the same time, it is now easier to fasten the deck boards.

VMG

Boards was not enough, and I brought them to the "heel". I advise everyone to buy a truck samostroyschikam. Over 25 thousand. rub. You can find quite a working version. Repair simple. inexpensive spare parts. This is cheaper than buying a trailer. I drove the car on wood, cement, doors, clothes and so on. D. An indispensable tool. If you put a tire with a tread developed, then the snow goes well.

Warming & Cabin studio trapezoidal sheet

For year-round use of the workshop should be warm. The construction market offers a variety of options for thermal insulation - polystyrene, extruded polystyrene, sprayed polyurethane foam, etc. User selected stone wool and at the same time, bought a steel sheet for cladding frame.

VMG

I lay on the roof of the steel sheet with a wave height of 35 mm. Metal thickness 0.8 mm. Such a steel sheet can withstand a large load. Not wrinkled, if for him to walk. Crate can be done less often. Snow also not selling it. Longitudinal Profile cooked overlap. I put more struts. "House" has become much tougher.

Stages trapezoidal sheet cladding workshop.

Installing doors and windows.

Wall insulation from inside.

VMG

The first layer of insulation - 10 cm. Then, crate, there is a second layer thickness of 5 cm. On top of the vapor barrier and insulation unrolled sewed inside wall trapezoidal sheet. The ceiling is insulated with a layer of the same 15 cm. Paul did not become warm. Only threw a vapor barrier and put OSB boards. Spring made around the workshop "ledge" of Epps and soil.

At the finish of works by sewed gables and shop corners.

Put sectional doors.

Mounted electric convector 2 kW.

VMG

Power electric heater with more than enough to heat the studio in winter. If you put on a maximum, it becomes hot. Therefore, I drive it on half power.

And that's what happened in the end.

Workshop built in the past month.

conclusions

Operation of the workshop showed that the idea completely justified. To work in the "lodge" is pleasant, warm and bright. The construction of the workshopVMGI spent 200 thousand. rub. If "uzhatsya" and sew the inside walls of OSB, take insulation cheaper and thinner steel sheet, the estimated decrease to 150 thousand. rub.

VMG

For the year to save rent, I Otobaya construction cost of the workshop. Another benefit - no need to go anywhere. Out of the house, and you're at work.

As you can see, no hopeless situations. If there is a head and hands, you can build a good-quality studio, even in winter, and to solve their problems.

Still have questions? Ask them VMG in the subject line Workshop 7h3.8 m on metal. Winter.

We recommend the article:

• Enclosed warehouse-workshop - construction of a helmet.
• Homemade tools and accessories for the home studio: Cutting machines of grinders, drilling machines from drill and engine from stiralki, concrete trowel, a cyclone for collecting chips and more.
• How to simplify the processing of metal-Yourselfers - useful homemade stuff from / used machinery.

In the video - makeshift workshop and an essential tool for samostroyschika-karkasostroitelya.

Subscribe to the channel! Share on social networks! Join FORUMHOUSE!