What types of soldering tips for soldering exist

Probably, most of us at least once held in the hands of a soldering iron and solder or unsolder certain elements. But all of you know that a good soldering iron to be a lot Replacement Tips, as they say "on all occasions." In this article I want to tell you about the most common ones, which should be in every radio amateur.

What types of stings to soldering exist

So, two main types can be distinguished among the variety, such as:

1. Conventional copper sting. Good old and time-tested sting. I just believe that if you search, you can find in the house was a similar pattern:

2. Removable nickel sting. Soldering such stings is increasingly gaining popularity.

If the first and so everything is clear, but the second, let's take a closer look.

Types plated soldering tips

For such stings just need to have a special collapsible soldering iron with the possibility to adjust the heating temperature.

Let's go over the most common species.

1. needle sting. In my opinion, the most useless of all. Since the sting of a heated very quickly cools, one has only to touch the solder. And a sting suitable only for fine work.

2. spatulate sting. This sting is used to work with large-sized radioactive elements. The meaning of the sting that on heating it hardly cools down, so you can quickly solder or otpaivat large radio.

3. drop-shaped sting. On this sting is very well kept solder, which provides quick and quality soldering of components.

4. Curve (curved) stinger. So simple and easy to dismantle parts with circuit boards, and solder them also very comfortable.

5. universal sting. In this tip, you can perform almost all the operations described above (more or less successfully), so if you only have a sting, then you may well be able to carry out soldering.

How does the sting on the soldering iron

The procedure for replacing the tip on the soldering iron is actually very simple and looks like this:

After the required set and stinger collect soldering in reverse sequence.

If you for some reason are not satisfied with nickel sting, then there are exactly the same interchangeable blades, but made of copper. By the way, I bought them in this store.

Care replaceable tips

To nickel interchangeable blades will last you a long time for them need proper care during the operation, and he concluded as follows:

Such stings is strictly forbidden to clean the sandpaper or a file. Such rough treatment would cause you remove the working layer and to this sting will not stick solder, and the sting of a burn.

Also, under no circumstances do not allow overheating. Keep an eye on the color of the tip, it must have a tin-leaden hue. If you have become a thorn violet-blue, the lower the temperature of the soldering iron.

Also, upon completion of soldering, it is desirable to leave a sting enough fat drop of solder.

Well, and finally a few words about security:

1) Never hold the heated soldering iron, the power supply cord;

2) Do not leave unattended heated tool;

3) Use only the special stand.

Like the article, then check it out. And thank you for your attention!