Why not restore the damaged tip screwdriver

Surf our internet, repeatedly ran into materials, which are very detailed tells and shows the recovery process (repair) as the favorite, but still his served screwdrivers. So, I want to tell you in this article, why should not even bother with this process.

How to restore a screwdriver and why it is senseless

So, in the placement of materials is proposed to take, for example, a file or better yet, grinder and about (to the eye) to grind off the sting and give it its original shape.

And now I want to say, what happens in this case. So, in the production workspace screwdrivers mandatory way passes quenching. From this it follows that if you are an ordinary a file could whittle a little workspace in front of you is not a screwdriver, and open the trash, which immediately need to throw out.

The second point. Each screwdriver corresponds to the standard classification of the type of PH, PZ, HEX, TORX and so on. D.

In addition, there is a correlation numbers screwdriver and the depth at which the calculated slots. So, when there is a "repair" work area, it is very likely that such a sting just will not be fully immersed in the slots, and you just simply to damage the screw head of the screw.

But that's not all. So how do you whittle down "hardened" some of the sting, then just a couple of applications of this tool, you will get exactly the same picture with a lick faces.

Of course, the softness of the material can be eliminated by quenching to produce, for example, with an induction heater, followed by tempering of the metal in the oven.

But other problems are not going anywhere.

conclusion

So, if you whittle workspace screwdriver, then restore it, spending their time and just not worth it. The maximum that you can make a "screwdriver" - is an awl.

And it's better go to a specialty store and buy high-quality screwdriver or bit, and you at least a few years forget about here such "advice" and thus will save yourself a lot of nerves and time.

Like this, then vote it Like. So the article will see a lot of people, and perhaps it will save them from such repairs. Thank you for your attention!