Repair of floors in the house. Part 1. Preparing for repair.
Faced with a problem when the floors are beginning to walk? When you come into the room with one hand, and a refrigerator, vibration, jumping on the other?
In this and several other articles, we'll show you how to repair the floors (hardwood floor) with a minimum of time, money and nerve costs. Go...
So, the first thing to do - is to assess the degree of overlap lag wear. If the logs are not rotten - it's good, then we leave. If the situation looks like this:
then with probability 99% a little blood, and do not have to change the entire structure.
The second thing to do - is to assess the state of hemming. If the base plate on which is insulation, well secured and there is no visual defects, then everything is fine, hem and left in place. If part of the hemming destroyed and insulation fell, it must either replace the defective items, or replace the hem completely, for example, to make it look like this:
The third step - should evaluate the condition of the protective film and the state of insulation. We are faced with such things as logs, Hem alive, and a heater (if used stone wool) all wet and, accordingly, does not work. All due to the fact that the protective film were stacked wrong. And in general, as a heater overlap in contact with the atmosphere, we recommend the use of water-resistant materials - for example, polyurethane foam, that was not so, as in:
Once these three parameters evaluated, you can proceed to the development of gender repair strategy (complete replacement or reinforcement of structures), which we discuss in the next article.
If you still want to know right here and now, here: https://dachamaster.org/services/construction/rekonstruktsiya-remont-polov-v-dachnom-dome/We describe in detail one of the repair options.
We will be glad if you subscribe to our RSS feed or advise his friends, which can be useful our materials!