How do I effectively and efficiently cleaned acrylic bathtub of different kinds of pollution

Recently I purchased acrylic bathtub and wondered - is it possible to wash it in the same way as the enamel? It turned out that there is. This gorgeous snow-white sanitary ware element has one significant disadvantage compared to steel tubs - exposure to mechanical damage.

Therefore, cleaning agents containing abrasive substances such as "Pemos" had to leave the basin. Nor can use household cleaning products with chlorine, ammonia and acetone, if you do not want to destroy the coating bath.

The basis for the care of acrylic bath is wiping it with liquid detergent applied on a sponge or cloth. Some washed off immediately, others must stand. I bought a cleaner for acrylic baths. Spray sides and bottom of the bath on the left 15 minutes according to the instructions. Then washed and wiped dry. That's what I had to:

And this is after the harvest:

Over time, the bottom of the bath formed yellow plaque.

Cleaners not print it completely and I decided to try the advice from the Internet to remove limescale by means of vinegar:

1. Dial hot water - about thirty degrees.

2. Pour 500 g of vinegar. It is possible to use citric acid (1 pack).

3. Stir and leave for the night.

4. Morning drain, rinse bath and wiped dry.

When I added the vinegar smell almost was not. I thought it would be sharply smell like when pickling. But apparently the case in the water temperature. But in the bathroom in the morning it was almost impossible to breathe. And this at an open window. But when I merged the dirty water and washed the bath, the smell was gone very quickly. And I realized that it was worth it - yellowness really gone!

You can also run into stubborn dirt, paint, fat free liquids. In my case it did not wash away the stain of time the finger paints. The child wanted to feel like an artist. When I saw it, it became immediately wash the paint, and after a couple of minutes of them was gone. But one spot has managed to "hide" under the towel. And it no longer took cleaner.

As it turned out, of acrylic tub surface is porous, because of what the dyes quickly seep into the coating. The longer the pollution, the more it vestsya and it will already be difficult to remove, if at all possible.

I decided to try to Vanish white. It caused 30 minutes (more afraid) and washed with water. The result is quite satisfied me!

Take care of your home!

Good luck in solving everyday problems!

Subscribe to the channel, the only way you will be informed of new publications - in front of a lot of useful and interesting information!

p.s .:On a note! HousingHe is trying to give you the most important, useful information. If you liked the article, please put "like".