Homemade lift and mini-crane: cheaply and efficiently

Options cost and simple "iron helpers" for lifting sand, slag, bricks, gas and foam concrete blocks

Build a house alone is possible, but difficult. Especially if you have to put the stone walls, up to the second floor of bricks, or "throw" on the overlap of sand and cement bags. In order not to overstrain. Savings on the order of the crane and, in general, to simplify your task, many users do FORUMHOUSE mini cranes and hoists. In this article we will talk about two successful designs.

Content:

• Automatic lifting handling equipment for bulk materials
• Homemade crane on basis hoist for lifting gazobetona

How to make a crane for lifting the slag, sawdust and sand

ed_hanow

Member FORUMHOUSE

I am building a house. I try to do without assistants. I want to fill the attic floor insulation - 20 cubic m and 10 cubic meters of slag. Age is not the one to run to and fro with buckets. I decided to make a collapsible automatic forklift for bulk materials. And that's what I did.

To make a homemade hoist you need:

• Electric hoist with a capacity of 0.9 kW with a maximum load capacity of 500 kg.
• Trough body or from garden barrows, load capacity of 250 kg.
• 12th steel I-beam.
• 8 pcs. bearings for the rollers.
• Electrical cable.

First fabricate the carriage. How it is arranged, seen in the photo.

Secure the beam at the end of which is welded stop plate and roller bracket of the carriage.

Inner stop (stop for the carriage in the attic) split. Hoist assembly with the carriage being pushed to the I-beam, and then screwed stopper.

Important! The beam is installed with a slope of 3 cm to 1 meter. Due to this, the carriage with the cargo itself calls in the attic.

Back on the end carriage beams stretched rope slung over the roller. The same rope holds the carriage to the load after lifting, unchecked did not go to the place of unloading.

Telfer is placed in a horizontal position. The level of user to adjust a set of engraving washers.

To beam welded string holders, on which is fixed an electric cable.

Important! movable cable.

The lift works like this:

• Downloadable trough sypuchkoy.
• Lift cargo up.
• Pounding trough at the unloading point.

• For unloading, lower trough to the soffit. lift locks are automatically disengaged.
• Perform unloading.
• Pull the carriage by means of a rope on the end of an I-beam.
• Lower down the trough.
• Secure locks.
• Download the trough.
• Repeat the operation.

ed_hanow

Lift I have uploaded to the attic of 12 cubic meters of slag. The device has fulfilled a bang. Not a single breakage. I disassembled and put it to the next building.

Participants liked the lift of the portal and they have questions to its creator.

Valery22

Member FORUMHOUSE

interested in:

• Why not use a standard carriage? Height restriction?
• How beneficial this arrangement? Not cheaper to hire a couple of handymen. Make the block and pick up on the second floor of the load on the rope? I think of the day 3 would have coped. Sawdust is even easier. Possible and in bags stairs shabby.​​

ed_hanow

I answer point by point:

• The sale did not have my carriage. Those that were expensive and need to be redone.
• height restrictions there. Slab to the beam only 1.8 m. It was necessary to enter in these settings carriage with tipper trough.
• I am building a house is not the first and, to lift a load, through the block, the two of us, it is still fun.
• With the electric hoist work alone. No one could depend. The lift is useful for the construction of baths, a garage, where he then left.

Mini-crane to lift the blocks on the second floor

And, in the end of the article, a homemade ramp, which will facilitate you to build a stone house.

pavel_khudoleev

Member FORUMHOUSE

I will lift home from silicate blocks. When we reached the second floor, the blocks become heavy to lift. Now I thought, and made such a cock of profile pipes and electric hoist.

Nodes closeup crane.

Carrying capacity of the crane for lifting blocks 150 kg.

The height of the mini-boom cranes with rotating built up. If necessary, the design can be easily disassembled and transported in a car trunk.

The support of the crane platform.

Stock Construction.

conclusions

Mini cranes shown above - well developed and cheap construction, have proven effective. Make similar models afford any samostroyschiku, which has a welding inverter, a Bulgarian and a drill. If you need more advanced home-made, heavy-duty cranes, we recommend the article:

• Mobile crane blocks for masonry. Fotoinstruktsiya with the drawings for the manufacture of home-made mobile two-arm cantilever construction crane.
• Mini Crane with his own hands: review of options. 3 top structure improvised cranes, including homemade German professional analogue mini crane Reach the central rack.
• Make a tap with his hands. The material - a mini-bar for lifting pioneer: drawings, calculation chain hoist, detailed photos.

Art House: Decorating the house an unusual and magical mosaic interior. About unusual design house built without wage-workers, says the author - artist-architect.

Subscribe to the channel and join the FORUMHOUSE and learn about other useful DIY!