What to do if you are in the bathroom electric shocks

This is a fairly common problem and people often suffer from a long time slightly, but still unpleasant current strikes in his own bathroom. If you feel this in your own home, you should not tolerate this, you need to start immediately find and eliminate the cause, as each subsequent stroke can cause irreparable damage to your health.

In this article I will discuss all of the major reasons why in the bathroom you can beat the current and how to get rid of it.

Reasons for "tingling"

This question can be divided into two major subgroups: problems in your home and problems in your neighborhood. Let's closely examine all possible causes:

1. The first is the probable cause of the failure of your washing machine or electric water heater. And if you have not sold grounding in the house, then you may well feel uncomfortable electric shocks.

2. Another possible cause may be a malfunction tingling wiring itself. Perhaps you have in the apartment (house) there was a broken wire through which a current leak occurs and that you feel through the bath and the wall.

3. If, on the water and touching the plane, you feel tingling, then the most likely faulty heating spots in your boiler or mixer.

4. The next reason is not directly related to you, and is associated with your neighbors (in the case of an apartment building). If they (neighbors) have implemented their ground by connecting it to a common riser and they will have a current leak, it will shake you. Just here, you can include the case when your neighbors are trying to rewind the counter and connected networks of zero wire to a metal water pipe. This now means that the current will go through the pipes, and if you touch the unpainted part, you can get a substantial shock.

These are all major reasons why you can "tweak" the current in the bathroom. Now, let's learn together how to address them.

Correcting the situation for the better

If you have a private house, you just have to do the wiring grounding. And if you are already there, make sure you check it out. The circuit must be an integer, and its resistance should not exceed the value of 4 ohms.

Be sure to check the serviceability of your electrical appliances in the bathroom. Disconnect stiralku or boiler, if it is then blows electricity stopped, it is necessary to repair the appliance.

Independently find a breakdown in the wiring is difficult without special instruments. The only thing you can do, it is to perform a complete audit of all your outlets and switches (possible cause of the fault in them).

Important. In the bathroom due to the extremely wet environments conventional sockets are not recommended for installation. Here fit specific patterns with a degree of protection IP 44. A switch is generally better to make in another room, regardless of its level of protection for your own safety.

Also at the recommended set bathroom tripping device (RCD), which in case of a leakage current will disconnect the protected portion. And you will immediately know that you have a defective device.

Also in the apartment buildings satisfied obschedomovyh potential equalization system, be sure to check its integrity and efficiency.

If you went over all the above points, and did not reveal at any defect, then feel free to go to your neighbors and look for violations of them. If you believe that your neighbors are not very conscientious people and doing rollback of electricity through the use of heating pipes, please contact a statement to the company that supplies your electricity or contact management company.

Here we examined the main reasons why you can "pinch" in the bathroom and how to resolve them.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]