LED lamp is flickering with the lights off, eliminate the causes

Now LED lamp is very firmly rooted in our homes and this is due to the huge benefits of using this particular light source. But as we know, there is in this world nothing is perfect, and this statement also applies to LED bulbs.

The most common problem is flickering off switch. So let's look at why this is happening and how to fix it.

flicker Causes

There are two main and a couple of flowing of the main reasons for which the LED light will continue to blink or glow very dim glow, and they are as follows.

main

- The quality of your wiring is poor and there are areas in the chain in a mediocre isolation.

As used in this room light switch is provided.

side

Inside each LED bulb is assembled controller board and if it used low-quality components, it will flicker.

Specific functionality of the device itself. Under this convoluted phrase hides a rather banal explanation. If the light is collected in inappropriate conditions and poor quality of the components, that is a high probability that the error will be in the control scheme. And since the capacitor in the circuit is present, then due to this error, it can give energy to the diodes and they will continue very dimly illuminated, and if it is still make-up due to defective wiring, the light it will constantly.

I hasten to say and reassure all readers. This flickering is absolutely safe for your health. The only thing on which it affects negatively, so it is on the very life of the bulb and no more.

Address the causes of the scintillation

Find the site of your network where the insulation has deteriorated almost impossible, so a detailed look at alternative solutions to this and other problems.

- Replaceable LED lamp with a low-cost and low-quality components for proven by a reliable manufacturer.

- In case, if the LEDs on the switch from the use of a backlight, it is possible to solve this problem in several ways:

First, the easiest and most radical, change the switch to the easiest.

You can also switch to an existing rule out the chain extending to the LED by cutting the supply cable.

You can also get out of the situation as follows: to attach a cartridge bulb parallel capacitor capacitance of not more than 500 microfarads or resistance

Finally, we touch the most difficult causes, namely, the wiring problem. It is very difficult to correct, the only solution will be a complete replacement of the wiring in the house.

Here we examined the main reasons for the flashing LED lights and how to resolve them. The most important thing to determine why it flashes, but as you understand, this process is to eliminate almost all cases is quite simple.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]