How to make garden furniture with his own hands: open season

How to make a reliable, convenient and inexpensive garden furniture with their hands

Garden furniture, made with his own hands from the remnants of formwork or unnecessary in the sector boards, may look better and last much longer than the expensively bought in the store. users proved FORUMHOUSE.

Content:

• Garden furniture with his own hands: how to make a reliable and beautiful table
• Garden furniture made of wood: how to calculate the ideal size
• Adirondack chair: a legend in the world of garden furniture (drawings and dimensions in millimeters)

How to make a beautiful table

Garden furniture for recreational facilities should be as beautiful as convenient. The product is a simple design looks very cool, if you highlight the texture of wood.

This table participant FORUMHOUSE Andrey063 I made of timber and edging board, who have long been waiting in the wings. Buy only have to:

• shading;
• lacquer;
• nozzle on the drill.

Table length: 1500 mm, height: 900 mm.

• Worktop - Edged board 150h50 mm.
• Feet - beams 70x100 mm.
instagram viewer
• Board, which is attached worktop and legs - 50x100 mm.
• Small feet out of the board - 50x100 mm.
• Board for a bunch of parts and footrest - 50x100 mm.

This picnic table is extracted from a number of other garden tables, looks thoroughly and fairly expensive, not least because the master allocated wood pattern.

To achieve this effect, "it is simple, but a chore." To do this:

• process board a plane;
• walk through it with a drill to remove the rust.

Andrey063

Member FORUMHOUSE

It is better to wear special glasses, because after the minutes of the whole as though in agony, and in the nose and eyes.

Processing board, packed as it is necessary to choose the wood in those places where it is soft. This would allow for the effect of "antique", create a table top as a tavern.

• Treat sandpaper board, but without fanaticism - simply remove the remaining large sawdust.
• Tinted cover. Coating two layers gives a more intense color.
• Leave to dry completely.
• Strip the skin.

Andrey063

Somewhere stronger three, somewhere weaker figure appears. the main thing – do not be afraid to spoil.

Highlight the texture of wood can be without attachment and without drill: Simply rubbed the board back and forth a wire brush. Softwood scrub the more rigid - remain.

Picnic table most comfortable size

Table with benches of this design like its solidity and strength: put and costs, will it not carry away. The hardest thing - to find the optimal size. From this table benches not otodvinesh not pridvinesh, and it is necessary that it was convenient for all guests, regardless of their height and build.

Before starting work on the establishment of such a table, our party with the nickname keednex Ask yourself some questions.

• At what altitude do the countertop?
• At what altitude do shop?
• What should be the ideal gap between the top and the bench, so it was comfortable to stand and step over the bench.

In his work, he decided to focus on the standards shown in the following picture.

And I decided to make a table of this size.

Keednex

Member FORUMHOUSE

It was very comfortable. It is appreciated by people with an increase from 160 to 195 cm and of different sizes.

In the manufacture of the table went to lie around the board: 0,147h0,037-0,05h6 m.

Keednex

First measured the whiteboard. For these dimensions built sketchape table in advance to see the angles and the right amount of gashes.

The result is such a specification:

• bench and table tops - 1.8 m, 9 pcs .;
• derzhak stalls - 1.7 m (in the figure it is 1.68; master decided to round), 2 pcs .;
• derzhak countertops - 0.73 m, 3 pcs. (Two lateral and one of grip - pullers in the middle, he, palm struts);
• pullers shops in the center - 0.29 m, 2 pcs. (When assembling the table it turned out that these details are not needed, so they are not used);
• jib - 0.83 m, 2 pcs. (30 ° sections);
• table legs - 0.92 m, 4 pcs. (Sections of 30 degrees).

The cut legs is calculated through a special application on the phone. It is necessary to specify the width of the board and the desired angle - The program shows how high your point, draw a line to get a 30 degree angle.

table assembly took several hours. At the end of all the elements better round table in order to avoid injuries on the corners, especially if there are children in the garden, sand emery product range in the Bulgarian and paint.

Epic garden chair Adirondack: drawings, dimensions, circuit

Furniture for cottages and garden Adirondack has more than a hundred years enthralls all adherents of suburban life. It has an interesting history. In 1903, American Thomas Lee and his family vacationing in the Adirondacks, in the summer house, where there was no garden furniture. Thomas took the pine planks, nails, a hammer, and together a few seats: tests the family! Family sat on every chair - it turned out that the most convenient is that with wide armrests and backrest tilted. That's out of that chair and raised a legendary line of outdoor furniture.

Adirondack chair in the United States is made from North American cedar or pine, but the members of our portal take any available tree, including the remains of the formwork.

It is a simple chair, concise, beautiful and comfortable with a sturdy seat that can easily withstand the weight of the rider 120 kg. Everyone is able to do it with their hands, the only thing - it's hard to find a model with intelligent dimensions in millimeters.

Member FORUMHOUSE with the nickname bOOber posted on our website manufacturing circuit, Translated a number of parts in inches and millimeters to plot them in size.

All curly detail draw better on paper in full size, using a large-scale mesh. Grid Step - 25 mm.

bOOber

Member FORUMHOUSE

Dimensions took, rounded in the run 25-25,4. As it turned out, the dimensions can be free enough to play. The main thing to sustain the same width of the seat

B - spar

C - lower rear crossmember

D1 - Foot

E - Support bracket

F - armrest

H - upper rear crossmember

I - dorsal strips

general form

• Transfer the template contours on the workpiece using carbon paper;
• Drank details;
• Carefully sanded (desirable orbital machine: it grinds flat and gently);
• Pre-assembled on rough screws;
• Disassemble the chair;
• Walk around the edges of the cutter radius, collect on glue and galvanized screws.

The angle of deviation from the vertical to the chair is not more than 15 degrees - longer deckchair.

Under this scheme, many participants made their FORUMHOUSE Adirondacks. The first chair by the far from joinery newcomers took two days, the second - half.

Vitaly M.

Member FORUMHOUSE

But still there are defects, collect five seats need.

All seats have turned out different, someone for verandas, someone for the garden, but always comfortable and durable.

conclusions

Many people prefer to make garden furniture with his own hands. It turns out very bad, even if you use only the remnants of boards left over from the construction site. Even the chairs out of old pallets favorably to the shopping plastic furniture; and about the more serious work and say nothing. One can only be glad for the garden belonging to the master.

On FORUMHOUSE can find lots of ideas for making garden furniture with his own hands, garden furniture for rest rattan, Read the detailed article on how to make your own hands chaise lounge and rocking chair, An article on how to make garden furniture concrete blocks, Watch video, instructional manufacturing brutal table for the gazebo.

Subscribe to the channel and save on everything! Join FORUMHOUSE, The best portal on the construction and suburban life and become a master of all trades!