How to solder twist flexible wire

Often, small works in the home has to constantly produce and cause the expert in detail can be very expensive and inconvenient. It is much easier to acquire a minimum set of tools and perform the work themselves. In this article we will learn you how to solder wires twist that lasts you a long time without incident.

What you need for soldering

First, let's collect the necessary equipment that we need to work. We will need: Soldering iron 80 W (in principle you can use any power but, for example, "sorokovke" (40 watts) is very a long time to warm up, and 100 W is excessively overheat wires, as well as it would be inconvenient to work), and solder rosin.

We assume that you have already completed twist, if not, link to how to do it correctly will be the end of the article.

Turn the soldering iron and wait for it to warm up, take a twist and treat it with rosin.

Then take a soldering iron and solder carefully treated with a compound

You should get here this result:

Then wait for the connection to cool down, and then check it. If you get a black plaque, then do not worry, it's just a resin residue left on the surface. This resin will serve you for additional insulation.

In the same way, if desired, can be treated, and twist of the hard-core wires, although experience has shown that if you do the twist correctly, the need for this. By the way how to do twisting copper wires, can be read in this article.

After completing this simple and relatively fast procedure, you ensure yourself a secure connection that will never diminish and will serve you for a long time.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: