Car trailer with his hands

With the construction of the house is very often necessary to lead a dozen bags of cement, a few packs of insulation, boards or just bought gasoline generator. Although such a burden - it's not the foundation blocks and slabs ground floorFor which a truck, however, on their passenger car not povezosh. Of course, you can order delivery, but what if the assumed constant purchases at the next construction market? Any prudent developer inevitably wonder: is it possible to save money?

In this situation, the rescue of any samostroyschiku come true universal soldier - trailer. It only remains to buy. Although, judging by the experience of users FORUMHOUSEOften the best option - to make yourself. This is what our forumchanin from Canada!

Roracotta (participant FORUMHOUSE):

- Anyone who lives in a private home, is well aware that the car trailer greatly facilitates keeping subsistence farming. So I decided to buy it.

However, a cursory examination of the samples exhibited in the store disappointed forumchanin. All trailers were expensive and, in his opinion, not strong enough. therefore

Roracotta I decided to make the trailer alone. For this he bought metal pipes, welding apparatus, a protective mask, electrodes. And it boil!

For trailer frame forumchanin chose rectangular pipe section 50h75 mm, 25x50 mm and 25x25 mm. For cantrail beads used area 30x30 mm.

Roracotta:

- The house under a roof I made a makeshift studio. As stocks put goats. The rafters of the roof unit set for lifting the trailer frame. Looking ahead, I can say that one of the main tools became Cut machine for metal.

Lintel for a trailer floor of welded pipe 25x50 mm. In the manufacture of frames went 50h75 mm tube. As shown, the cross-section of the pipe even excessive for the manufacture of a small trailer. For example, for a trailer, designed for shipping 1.5 tonnes used for the frame 38h75mm pipe. But because Roracotta want to save, you have to take with metal hands and only this size.

After welding, it is welded to the frame "drawbar", and for lifting heavy design of valve used improvised unit.

Roracotta:

- The unit in the roof overhang great help turn the next trailer and fix it in the correct position for welding.

After provarkoy joints need to clean them with a special "stone".

After welding the frames are cut under the pillar side of the trailer. The size of the square pipe 25x25 mm. To rack look carefully, on the one hand the tube must be made propyl angle of 45 degrees and a bend metal.

Despite the fact that almost all parts were made for the trailer alone, some parts forumchanin still decided to buy.

Roracotta:

- Not far from me, there is a company that sells trailers and trailers. There can be ordered any axis in any size and for any load. Make one day. By axis attached everything that is necessary for the axis to the mounting frame - screws "earrings", "ears" nuts for the wheels.

Kit, including all taxes and a certificate worth $ 180. After obvarki entire structure Homebrew proceeded to the calculation of the main scenes of the site of attachment springs. Thus it is necessary to adhere to this rule:

Center axle trailer trailer shared by 60% of the length of the front and 40% - behind. Center of mass of the trailer should be shifted closer to the hitch, and it is always positive load should act.

Roracotta:

- After this, we set the axle assembly on the already welded base and find a place in the back of the rocking wings. It is also carefully and be sure to scald the reinforcement plate of the corners, "pole" - below.

Further, on top on all sides of the rack segments welded pipe 25x25 mm. They are necessary for fixing the tension elastics, fixing cargo.

An interesting feature - in Canada, you can not use wheels or tires of a conventional car. Only for special trailers. In the case of non-compliance with this rule, the police may issue a fine of $ 250 per wheel.

Roracotta:

- Each wheel disk cost me $ 98.

Trailer for the wings used metal plate. The frame of the trailer is painted with black paint, and electrical signals for still held in the corrugated pipe.

For the inner lining of the trailer forumchanin used impregnated board 16h140 mm. Impregnated wood - a board, impregnated under pressure Bioprotective means. This board does not rot and is not afraid of water.

So it worth it?

Roracotta:

- Trailer me has managed in $ 680. In the store, the same size and load capacity trailer, but less durable, cost about $ 1300-1450. A registration and receipt numbers must still pay $ 75. Total - $ 755.

Many members of the forum can be asked and how the registration of such a self-made structures? And as far as the procedure is laborious?

Roracotta:

- In Canada, all homemade trailers must undergo a mandatory inspection by a certified mechanic and get permission to register. It was only after the payment of fees issued a registration number.

Detailed and vivid story about the construction of forumchanin trailer available in this topic our forum. If the construction of the house you need a tap, from this article you learn how to do it. How to make from an ordinary trailer trailer workshop, users forumhouse.ru can learn here. And this THE VIDEO It describes the useful homemade products to simplify the work in the country.

Subscribe to the channel and put the "Like" so as not to miss the next release!

Do not agree with the author, or find a mistake in the article - write about it in the comments!