The system "warm roof", or vice versa heating

Abroad we have developed a universal system that can heat the house and become an alternative to the air conditioner.

I combine in one device the heating and cooling system - the cherished dream of many owners of suburban real estate. It affects the versatility and convenience of using such a device. Despite the advantages of such a system, many deters the high price and complexity of the equipment installation, combines two functions. Decided to change the situation the Italian firm that has developed a universal panel heats the house in winter and cools it in summer.

The company's engineers, based floor heating system, decided to get rid of such a process step, as a screed. Instead, they constructed a flat light panel thickness 2.5 cm, inside the tube are laid serpentine through which the liquid circulates.

Thermal panel is designed for flush mounting on the ceiling or in the wall, and the installation process is no more complicated than installing drywall sheets in the frame house.

Proprietary systems, the Italians came with his offering for the North American market - the area where people traditionally prefer to heat homes

Air heating systems.

Roberto Messana:

Our panels emit a pleasant radiant heat, which is perceived by the body comfortably. This reduces the heating temperature in the room and thus save on bills for energy. Furthermore, an "invisible" radiant panel, unlike conventional radiators, does not spoil the appearance of rooms.

If we consider the panel section, you can see the foundation made of expanded polystyrene foam. It is applied to a substrate of aluminum are milled grooves which fit into tubes fitted with two liquid circuits.

Top panel closes standard plasterboard sheet, for the subsequent decorative finish. The panels can be painted, glued on them tiles, etc.

Depending on the season, the tube is fed hot or cold water. Accordingly, the system works on the heating or cooling of the room.

For ease of installation of the panels designers have developed a special adapter, through which you can quickly connect the pipes.

To panels during assembly workers are not damaged piping, the outer side of gypsum board bear special markings, which at places marked for screwing screws. Also, the panel can be cut along the lines of the markers, to connect with each other, increasing the area and capacity of the heating system.

Due to the modular assembly system and more standard sizes of panels manufactured significantly expands the scope of application of the system.

The authors emphasize the development of that system can be used for heating private houses, as well as large areas of the office type. Due to the good heat transfer, the panels are easily on a given thermal regime, but, because of the small mass (in Unlike the system of floor heating and basement UWB, which is especially important for karkasnikov) do not work as heat accumulator.

For convenience, a special control system includes a temperature sensor and the block, which regulates the temperature of thermal panels.

After reading our article, you will learn about System "warm plinth». The topic on FORUMHOUSE explains warm water floors. Also recommend to watch the video on homemade radiant panel heating system.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!