How to make a wooden box with his hands?

Most often thought about making the right on the farm, homemade or necessary parts occurs at the stage of construction of the house. This is not surprising, because all the money goes to the construction site, and so want to save. Set in wooden box house - the dream of many, that's just the price of their bites.

This factor was decisive to our user with the nickname Ravildon I decided to roll up their sleeves and make their own wooden windows.

Ravildon based his profile Finnish windows. Also, it took the following tools:

• manual frezer;
• Cutter for cutting microspikes;
• a movable carriage.

Billets for windows cut out of the timber. Pre otortsovannoe wood glued together with each other to obtain the profile of the desired length and thickness.

An interesting approach to the treatment of wood with the nickname forumchanincyan__.Lumber bought it first passes through the marking gauge and end view of the circular saw with a homemade device - high rip fence to guide and rulers of 0.5 mm. After provisional bonding profiles and fitting accessories cyan__ polishes and paints wooden profile.

Validating recommends that you first practice on the dummy, and only then move on to the work piece.

Halvastarshy (User FORUMHOUSE):

- In order not to get lost in the blanks, cut timber I then enumerated and arranged on the packs.

Quarter and a seal groove - depth of 6mm and a width of 35 mm, selected on forumchanin circular saw and cut to give pure and smooth, it produced machine.

For this Halvastarshy welded frame, and sliding table circular saw attached manual. Because Profile rectangular slots, then there is no need to use forumchanin shaped cutter. Depth of incision is adjustable movable abutment height - a set of plates and rectangular tubes.

Halvastarshy:

- I cut a groove in 5 passes, gradually changing the thickness of the plates, putting emphasison pre otortsovannom bar, and all sizes are logged.

In order not to spoil the detail forumchanin leave allowance of 1.5 mm on the processing ends. Then glue the flap, hold powerful piece clamps. Finished goods Halvastarshy then enumerated and piled in a pyramid.

In the process, at forumchanin a question: whether it is necessary to enhance the profile of the sash steel angles under heavy glazing?

cyan__(FORUMHOUSE User)

- When I made wooden windows, the sash is not strengthened, just cut the spike 3 and put them on the glue.

To test the strength of the sash, one corner can be glued together and to load it in a half glass mass.

What if on the blanks for windows visible seams and edges left by the cutting tool?

Halvastarshy:

– There is a trick: if you can not completely hide the defect, it is necessary to emphasize.

Viktorovich73(User FORUMHOUSE):

- Because sharp edges are colored bad paints and varnishes, I do not edge rounding and cut at an angle of 45 degrees.

Removal rates of facets on the compounds to hide discrepancies that arise in the process of self-production of the window. To United detail looked even better, do not remove the chamfer angle of 45 degrees, and are rounded to a radius of 3 mm. On sharp surfaces generally thinner ink layer. These facets are most vulnerable to exploitation, and on sharp corners paint wears faster!

Once all the parts are made, we proceed to the window assembly.

Suhov76(FORUMHOUSE User):

- If there is no assembly vajmy - small press for bonding wood products, you can use the rigging strap ratchet. Tighten the belt aroundframe, At a distance of 10 cm from the corners puts a lug, and Asking ratchet necessary effort.

Many people are interested in the question: is worth powder and shot, and not easier to buy a ready-made wooden window? Because in addition to the purchase of materials, special tools and fixturesIt is necessary to spend personal time, which, as we know, is never enough. Let us turn to the members of the forum experience.

cyan__:

- I calculated that self-made wooden box measuring 2x2 meters, including all materials, cost me about $ 500.

A lot or a little? For example, the price of the purchased wooden windows 2x2 m of larch or oak will start from 40-70 thousand. rub. And in addition to material costs, should be considered a great moral satisfaction of knowing that your home windows are made their own hands. And as the experience of our members of the forum - in any case the main desire, and experience will follow!

Learn all about independent manufacturing wood windows can be here. user reviews forumhouse.ru about wooden windows assembled in this topic. What are the profiles of PVC windows warmest? The answer to this question, you will learn here. Photo report on the manufacture of home-made cutting tableread in this topic. In that videoClearly explains what is needed okosyachka door and window openings. And this a movieyou will learn how to make your own window to the fairy-tale house.

Subscribe to the channel and put the "Like" so as not to miss the next release!

Do not agree with the author, or find a mistake in the article - write about it in the comments!