How to make a garden lighting from the stump

Garden stumps fixtures invented Duncan Mirding from Tasmania. These are real works of art that are admired and really derive garden to the next level. For the participants to make such FORUMHOUSE fixtures It is not difficult.

For the manufacture of garden lamp It needs well dried stump. To start with shooting him bark and make vertical cuts a small depth of about 4 cm in width LED strip. The easiest way to do such cuts chainsaw, chainsaw if not, you can identify cutting edge ordinary hacksaw and knock them out of the wood chisel and hammer. Thus we do five or six cuts around the perimeter of the timber.

With nazhdachki smoothed all the rough edges of the stump, sweeps from propylene residues sawdust.

The cuts Recessed LED ribbon (usually they are equipped with double-sided adhesive tape), solder them to the wires and connect to the driver.

Designers like a tree - on FORUMHOUSE you can view other variants Wooden lamps. Also on our website you will find lots of ideas for self manufacture of furniture and interior items. And see our video, which shows the processing techniques deadwood.

I liked the material - subscribe to the feed and put the "Like" so as not to miss the next release!

Do not agree with the author, or find a mistake in the article - write about it in the comments!