Useful content

How to get rid of the stains on the liquid wallpaper?

click fraud protection
The room, whose walls are decorated with liquid wallpaper
The room, whose walls are decorated with liquid wallpaper

Liquid wallpaper wonderful alternative to paper wallpaper. With them, the walls acquire a beautiful view, do not need to spend time on the yardstick of paintings and achieve pasting of joints with a pattern. However, this coating has an important feature - it is applied in liquid form and not properly prepared surface can trigger the appearance of yellow spots.

One of the causes spots on liquid wallpaper, as is the case with the paper web - if the wall before applying the wallpaper was not primed properly. It is important to understand that each coat of primer to dry separately and must be good. Thus, the wall is obtained and the desired impregnation of hydration, and after drying are impermeable film. Ignore this step, you can get yellow stains.

Tread spots on liquid wallpaper
Tread spots on liquid wallpaper

If the walls are not treated with primer, all of the moisture is absorbed from the liquid finishes to the wall, so is a violation of the carrier layer of wallpaper. Deposited in the form of a liquid paste, wallpaper quickly come into contact with all the errors of the wall. If the inside of the wall had nail or fixture, the wallpaper will pull all the unnecessary and tread on the surface rust. In old houses, lime is often used in the construction of walls and it, in contact with the wallpaper may allocate efflorescence - they cause yellow stains. When applying liquid wallpaper to use a thin layer, the surface may simply appear through the wall. Not each of these causes can be eliminated locally, in some cases, need to complete overhauls. But you can try to cope with the yellow spots.

instagram viewer

Removal Method: Before you start to fight with spots, it is necessary to ensure complete drying of the wall surface. Dilute with water "Whiteness" solution or any other containing chlorine. Proportion 2: 1 water (2 liters water and 1 liter of "whites"). All should be mixed and applied with a brush or pour it into a spray bottle and apply on the wall in the place of distribution of the defect. A few minutes later stains disappear.

Fiberglass - to select and work with them

Fiberglass - to select and work with them

If the traditional paper wallpaper known since antiquity, but the first rolls of vinyl were in th...

Read More

What vegetables can be sown the seeds for the winter

What vegetables can be sown the seeds for the winter

What do you usually do in the garden in May and June? If engaged in planting, instead of collecti...

Read More

A place to live (part 2)

A place to live (part 2)

So we became the happy owners of dilapidated walls and a piece of land in the Krasnodar region. L...

Read More

Instagram story viewer