Wireless lighting of premises.

Novelty design, allowing to create an original ceiling, unusual decor of the walls and the floor, was the development of a wireless lighting. The idea of ​​such coverage was proposed in the early 90-ies of the last century, but its realization Wireless lighting system was only in the mid-nineties, and the public began only in the century present.

Wireless lighting system is a light bulb, a recessed panel which comprises two conductive layers. The presence of these layers eliminates the need for wires.

Advantages of the panels:

• low weight (manufacturing material - polyurethane);
• small thickness - 19-20 mm;
• resistance to water;
• good sound insulation qualities;
• strength;
• the possibility of using bilateral panels;
• easy installation of panels and lamps: you just need to pierce the panel in the right place and install a light bulb;
• the possibility of any trim panels (paint, plaster, wallpaper, fabric);
• large selection pattern (due to small fixtures - "fireflies" - can create any dot pattern);
instagram viewer
• a large selection of lamps ( "fireflies" can simulate a starry sky, and the full ceiling lights - carry the main lighting function).
• insulation reliability at the correct installation conditions.
• a wide range of uses: it can be mounted on the ceiling, walls and floor, creating murals, paintings, used as primary and secondary lighting, advertising stands and displays.
• panel operates under 12 volts.

In addition, we note the important fact - the panel itself is not a consumer of electricity.

Disadvantages of a wireless lighting panels:

• artificial material;
• the need for additional insulation when installing all metal elements;
• need for installation in a readily accessible place additional electrical step-down transformer and a special connector. The connector is mounted on the panel itself or on its end. In this case, one connector can connect up to five panels.

mounting features:

Due to the small thickness of the installation is almost not "consumed" by the ceiling height. It is therefore possible to use in rooms with low ceiling height and the creation of multi-level ceilings with drywall.

Permissible use of any fasteners, including liquid nails.

When using metal screws need to isolate them to prevent short circuits.

Perhaps the use of panels of any size, but not less than 10 cm wide.

When installing floor illumination in a laminate parquet or other floor covering makes the necessary number of holes into which the bulb is inserted and closed with special caps. A conductive plate is placed under pre-laminate or coating.

Thus, wireless panels are almost universal element of the decor, they are highly functional and easy to use. Wireless panel leaves a wide scope for your imagination.