Secrets of the Pros: How to wash kitchen apron

Quickly and thoroughly wash the fat on a kitchen apron of tile or plastic is not so simple. Aggressive means can spoil structure (texture) of the surface, and too soft household chemicals will not give the desired result. The most difficult to work with the area above the stove - in this part of the apron, fat dense, molten.

The work will go faster if you first heat up a little body fat, for example, pour steaming. If this tile, you can for a few minutes to put the oblong container with water at the base of masonry. The surface of plastic, better handle locally, using a spout of boiling water. Cleaning and maintenance products, it does not matter, made by itself or bought in a store, it is also recommended to use a slightly warmed. Before you apply the resources to the entire surface of the apron, should try its effect somewhere in an inconspicuous area and observe that the composition does not remove together with fat and some of the material.

Absolutely forbidden:

mixed multiple folk remedies or household chemicals, in the hope that will increase efficiency. A positive result is not guaranteed and permanently damage the apron in the kitchen - is quite real.

The fight against fat, persistent spots folk remedies:

• Mustard powder. To clean a very dirty surface of plastic or tile, you need to apply with a damp sponge, dry powder on the problem areas, leave for a few minutes and scrub product with the fat. If the situation is more complicated, you have to prepare a concentrated solution of dry mustard and warm water. We must work with gloves.
• Congee. The liquid which remains after the washing or cooking rice boiled product copes with fresh contamination. It is better to use in the form of heat, after processing must be thoroughly rinsed with clean water apron, or may be left streaks.
• Lemon acidWill not only clean the tile, but also disinfects, bleaches, degreasing the surface. It can be used in dry form, but first have to moisten fatty zone hot water. Plastic processing so aggressive component is better not to use.
• Vinegar. Not the most pleasant work, but very effective in the fight against fat product. With minor impurities, it is better to pre-diluted with boiled water.
• Soda. Optimal variant for cleaning the flashing of plastic. With it also works as a mustard. Hot water wets the working area, causes jaw sodas, waiting 5-10 minutes and rubbed stains.
• Soap solution. The concentrated soap solution is equally effective when working with fat traces on any surface. It is best to nastrogat soap into a bowl and dissolve it with warm water. The resulting mass is applied to the apron, wait 5-10 minutes, then rinse until complete disposal of fatty streaks and spots.

When restoring order in the kitchen, in the first place, it is recommended to use the listed facilities. Their pair quickly erode, so the risk of contamination of food particles or detergent penetration through the skin is minimal.

And we will be very grateful to you for subscribing to our RSS feed or recommendation to friends and acquaintances. And, come to our sites, see the information you want, call, ask, consult, order:

Suburban master -https://dachamaster.org

DM-Cleaning -https://dm-cleaning.dachamaster.org