Construction of frame extension to the house

In this photo report we describe the work we have done on the construction of the wooden frame of an extension to the house of the profiled bar.

The task: to carry out the construction of the wooden frame of an extension to the house of the profiled timber "turnkey", including constructive exterior, interior trim, as well as engineering systems (heating, electrician).

The progress of the work: According to the annex to the customer's home should be of a rectangular structure, divided into two separate living rooms, and attached to the end of the house, designed to increase housing Space home.

To solve this problem, first of all, our company has developed design documentation, subsequently approved by the Customer. All further work on the construction of an extension to the house framing performed on the basis of design documentation. So, first of all to acquaint you with the object of building:

To the right end of the house and planned to attach the two living rooms. Given the cold season, a complete disassembly of the end wall structure, rearrangement of windows were made after the construction of the frame outbuildings, everything ceilings, insulation of walls, roof arrangement, ie after extension was the maximum construction readiness. This decision was necessary in order to avoid defrosting the main house.

So, prior to the start of construction, together with our partners on the construction of pile foundations, analysis was performed on the bearing capacity soil and minimum value determined penetration screw piles (the base extensions, in agreement with the customer, it was equipped pile). After this operation, we have begun to pile field arrangement:

After piling field arrangement, pile heads were cut to the required level and scald channel, which is the binding-support structure erected framing extension to the home:

The next step in the construction of the carcass of an extension to the house was the analysis of the external cladding of the end wall of the house for ensuring binding new structure to the existing, then the construction of the wooden frame was carried out extension. Naturally, all the material has been pretreated with antiseptic compositions that exclude the formation of fungus:

Upon completion of works on the construction of the wooden frame of an extension to the house, was undeveloped wind insulation exterior walls, interior vapor barrier, as well as the proper wall insulation frame extension:

Wall insulation is combined satisfied, namely outside the carcass is laid a layer of insulation of mineral wool, and inside, the width of frame beams, formed ecowool insulation. Thus, the overall thickness of the wall cake turned 200 mm. At the same time, insulated wall cladding executed framing extension to the house, construction of roofs and floors. Insulation slab fulfilled by a heater "Penoplex" 100 mm thick in two layers:

After completing all external works, it was the turn of the internal arrangement, including walls, ceilings, floors, as well as the laying of engineering systems - heating and electricity. Here we note two points: first - existing windows have been rearranged on the end wall framing extension. Instead rearranged windows were equipped doorways (see. a photo). All electrics in an annexe to the house has been executed in the style of "retro" - it is also possible to look at the photo below: