The construction of the gazebo in the summer cottage

Here is another photo report, on the progress of our company, for the construction of a wooden gazebo in the Klin district, Moscow region.

The task: perform the construction of a wooden arbor with a non-combustible substrate.

Progress of works: In this case, the construction is based on size and sketches shown customer. One requirement was to ensure the incombustibility arbor base (floor), so that it could be in Further put a barbecue or cook barbecue without a special training base if the floor was wooden.

As a solution to this problem, we proposed to put the gazebo floor with the same material as that of the track on the object, namely the stone blocks "Old Town". Thus pergola floor will be in harmony with the tracks on the site and secondly provided necessary fire safety (if it is not clear what is at stake, it is recommended to read this review before end). So, the first thing that was done - spaced building spot:

The photo shows that out of the land acts neck plastic containers - it's buffering capacity, providing the necessary reserve water, provided by the customer, due to the low flow rate of the well (the well is pumped out quickly and for a long time once again recruited. This is what we were told here). This neck has been intentionally included in the building spot in order to protect it from rain and possible man-made pollution. There was only one question on how to accurately "fit" into the design of a wooden gazebo, but more on that below.

After marking the construction site, as well as considering the fact that the classical foundation and the wooden floor is not provided structure below the freezing depth (about 2 m) were drilled wells are installed and concreted supporting pillars power skeleton:

After setting concrete pillar sites, around the perimeter of the gazebo was designed trench and laid Lower banding beam with which all the posts are interconnected by a single circuit welding:

The next step was the installation of the upper strapping beams, installation of roof system and the future crates wooden gazebo, as well as laying the roofing, in this case, the metal:

no images were found

After the wooden roof arbor acquired form design, it is the turn of installation of flooring. As noted above, as a floor covering arbors, was used pavers "Old Town". For its installation, the sample was made earth to a depth of about 35-40 cm, filled layer of gravel, sand made and compacted bag, after which the mixture was laid on peskotsementnuyu fixings:

Upon completion of the work on laying the pavers, it was time to the buffer tank outlet scenery, talking about which was above and plating fence gazebo. Neck buffering capacity, it was decided to cut off and close the steel hatch with lock and gazebo fence sheathe timber imitation, remaining from previous phases of construction, pre-processed antiseptic compounds, including bleaching and tinting preservatives preparations:

At the completion of the construction of the gazebo was constructed decorative grille mounted Decorative corners on inner and outer corners, made finishing tinting antiseptic compositions:

Result gazebo perform construction work you can see in the following photo:

More detailed information on progress of the works can be found in our photo gallery. The total time of work on the construction of the gazebo in the Klin district of Moscow region was 14 days.