How exactly to trim the linoleum around the pipes. Instruction for beginners.
Typically, the heating pipes are in each room, so when laying the floor covering without fitting material to them simply can not do.
but far not always complete this phase of the work it turns easily.
For example, when laying linoleum is precisely trimming around pipes It causes the most problems for beginners.
To resolve them, a closer look at this stage of the work below.
Start with the fact thatto trimming around pipes linoleumyou need to start already directly before installing baseboards.
In this case flooring has time to lie down in the straightened form and adopt its final position on the floor.
cutting process begins:
Linoleum is tightly pressed against the tube and place determined inflection (You can mark it with a pencil for convenience).
Then using stationery knife is a vertical section wrapped part of linoleum exactly in the center of the pipe.
In this case inflection to the place nearly to dorezaetsya.
Then using a pencil with one hand from the incision line is carried out on the linoleum, describing a quarter circle on the diameter of the pipe.
The same layout is applied, and on the other side of the cut line on linoleum.
As a result, the material obtained painted semicircle.
For, the middle of painting a circle on the linoleum,measured diameter of the pipe, The amount transferred to the linoleum and second semicircle dorisovyvat pencil.
Then remains only gently for road marking cut the excess part of linoleum and place it around the pipe.