Useful content

Free garden path with his own hands: stone blocks of burnt wood

click fraud protection

Let's talk about how to make paving stones at home. Strong, water-resistant coating for a garden path can be obtained for a penny. It does not require special care, durable and environmentally friendly, as the main material - wood.

Durable Pavement with their hands out of the ordinary natural material. Original coating can be produced independently.

The idea is this - to make paving stones made of wood. We describe the technology that will give the material durability, moisture resistance and durability. The texture and color will be combined with the plants in the garden. This track is heated by the sun will be smaller and more pleasant for the feet.

Image: news.hitsad.ru/wp-content/uploads/2015/05/oformlenie_sadovoy_dorozhki1.jpg
Image: news.hitsad.ru/wp-content/uploads/2015/05/oformlenie_sadovoy_dorozhki1.jpg

You can use the waste from round logs or any other round, rectangular or square trim. Track cost free and appearance will delight.

Best Pine. Dig a trench, poured gravel, then the geotextile, covered with sand and put the prepared timber. For example, a saw cut diameter of 14 cm., 15 cm. Then fill the gaps between the tree in the same sand.

instagram viewer

How to make more durable and beautiful paving stones?

Wooden cobbles. Photo: mogilev.flagma.by
Wooden cobbles. Photo: mogilev.flagma.by

Apply baking. This simple protection against rot, insect, deformation of moisture. Calcination yields a particular material strength and durability. It becomes wear-resistant material with improved flame resistance.

Conventional pine after firing is converted into an expensive wood. In appearance, even an expert can not determine what kind of breed. The oldest, defective pine turns into an expensive wood - wenge.

Photo: proxy11.online.ua/prikols/r2-9901a8444f/558ab2a3cdcd9.jpg
Photo: proxy11.online.ua/prikols/r2-9901a8444f/558ab2a3cdcd9.jpg

Firing is better to use dry wood. The work will require one tool - a gas burner. This is the best variant. Blowtorch is not appropriate, as it may stain on gasoline and on the tree.

Beginning with the surface treatment throughout the material. Warm tree. Knots must be carefully warmed in stages. It is necessary to make the wood surface slightly cracked. Then pour the water and clean material after drying of sludge with a soft brush. Additionally, you can process the dried varnish burned paving stones.

Image: cdna.artstation.com/p/assets/images/images/008/369/138/large/santi-lopez-closeup-s.jpg? 1512327834
Image: cdna.artstation.com/p/assets/images/images/008/369/138/large/santi-lopez-closeup-s.jpg? 1512327834
channel RemontDom: Subscribe to the channel, click on the Like. Thanks and good luck!
What can be made from scraps of plastic pipes? Simple workshop ideas

What can be made from scraps of plastic pipes? Simple workshop ideas

Simple ideas from scraps of plastic pipes for the workshopHello everyone! I have quite a few smal...

Read More

Modified a soldering iron for welding pipes in hard-to-reach places. The reader helped

Modified a soldering iron for welding pipes in hard-to-reach places. The reader helped

Modernization of the deviceI decided to improve the soldering iron for 600 rubles, so that it bec...

Read More

What an average Pole's apartment looks like

What an average Pole's apartment looks like

Having common "Soviet" roots with us, the Poles were able to grow out of soviet heritage and "gra...

Read More

Instagram story viewer