A small chest of drawers using a jig machine. Boxes of solid wood.

Use the scroll-saw machine can successfully do a little furniture. This furniture can be a doll, but can also serve for small items, jewelry, or other tasks.

Take a look at here is a chest of drawers.

This chest of drawers has dimensions 100h70h50 mm.

It is made of two types of wood: maple, Manchurian walnut.

Basis cut from the core of the old, long since dried up maple trunk. Therefore, there is a red-brown and gray streaks occur.

This maple bar via jigsaw machine sawn three rectangular parts.

Boxes have to cut out these parts. Intact in boxes turned out the bottom and sides. The rear wall and facade glued, and the rear wall was made from maple, and walnut Manchurian facade.

The cover and base of the chest is also made from maple. The rear wall of the Manchurian nut.

Similarly, the more make caskets and chest of drawers with the help of the band saw, but then be sure to get the incision for the entry of the saw blade.

Using the scroll-saw machine can be made more miniature products and to cut domestic holes that do not require additional processing as sawing machine Jig gives pure cut.

And the chest of drawers was made as a gift and planned for jewelry. But when he was presented, in addition to the words I heard thanks: "That's great, I'll put here vitamins. In the morning, afternoon and evening. Just three drawer. "

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.