As I made a wooden plane. First experience. Part 2

I continue the story of how I made a wooden plane. And the first part see here.

After gluing shoe parts got this.

Now it was necessary to make a paste and wedges in the block following the example of the old.

Sawn wedges on the bandsaw beech pieces which remained on the base. Made layout and tipped saw table on this markup.

For the sawing of the wedge can be used luchkovye saw. About homemade Luchkova saw see here.

The resulting wedges, I tried to block and cut based on the glands and wooden wedge for her.

When gluing their wedge clamps pressed, and in the middle for the thrust piece insert of polyethylene foam.

Next, at block cut off the excess portion of the side cover plates and the wedge, and then polished. To the front of the planer, I decided to do a pen and pad to make a rounded, so it can be to clasp his hand.

After grinding saw glued corners different from those on the old plane. It was necessary to cut off (or be ground) is another angle to the bonding, so we had to bring them to the desired form on the site. Used for this purpose rasp, chisel and nazhdachku.

Wedge made and ash bar and made it about 3 centimeters shorter glands planer.

Next, it was necessary to do it in the old wedge type.

Some aspects of manufacture are missing in the photos, so for the sake of completeness I suggest to watch the video clip.

Tool to get a working and quite convenient.

As a result, the plane, I gave a relative. The gift was a hint, just a relative retired on superannuation and stayed at home.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.