How to box on the scroll-saw machine.

I take a look version of the manufacture of small boxes by using jig machine.

Boxes I decided to do with the decoration on the lid.

Pre-prepared template for cutting and cut blanks for boxes.

Housing boxes I sawed pine 30 mm.

While doing a pattern on the bottom and the lid, turned easier to cut around and drank these details on the finished body.

Following sawed decorative elements on the lid.

Further sawn from the inner portion of the housing, on the circular saw in two passes neatly sawed to cap liner.

All the work is done and then gluing and polishing.

The insert is stuck to the cover positioned on the PVA and via its housing.

Once pasted bottom of the box. His cut from the stock and the excess cleaned after grinding.

Decorative elements for cover, I polished using bormashinki. Homemade nozzle used with sandpaper and base of porous rubber.

These elements then I'm stuck on the lid. Mark applied for, by cutting out the remaining part.

At the end of covered all the wax mastic.

Dimensions of boxes - 130h80h50 mm. The case - pine. The upper bottom of the upper box Manchurian nut in the bottom - rowan, lining the first nut, the second beech.

You can also watch a video clip on manufacturing. There is much more detail.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.