Features and Tricks masonry stoves

Masonry stoves - a matter that requires special skills. But in spite of this, if you know the features of masonry stoves, which allow you to intelligently distribute their potential and realize you can do the work and not treat yourself to professionals. As a master, I can say that very few tricks, but still they have I will share with you so that you can understand the essence of masonry.

What are the main components have each oven?

• Foundation - under the surface of the stove, which is necessary for even weight distribution and floor protection
• Furnace - combustion chamber
• Grate
• fly Camera
• Chimney

Features masonry

Have you ever wondered why a brick is used for masonry stove? I answer, this material is quite suitable for heat transfer. Oven, built of brick, quickly warmed up. Once the air passes through the oven, ensures comfortable room temperature, then, the air is returned back on cooling.

It should be noted that the type of furnace brick quality depends. There are several categories of bricks, which are necessary for laying all. If you want your stove stood for as long as possible, use for each stage of laying the bricks for special purposes, and then, you will be provided with warmth and comfort throughout the house.

But despite the fact that for each stage of the furnace masonry using a separate type of brick, they are all united by the same characteristics:

§ resistance to high temperature and open flames;

§ high mechanical strength;

§ resistance to temperature fluctuations;

§ ability to store heat and save it.

Also, pay attention to the sand. In my practice there were many cases where the masonry at home have failed because of the sand is part of the solution. The sand must necessarily be pure, free of various impurities sludge, stones, and other components. Also, I suggest you refrain from river sand, as its structure is less granular, more rounded - this is not the best option for masonry.

As to the masonry, the wall of the furnace must consist of at least two rows of bricks. For a more uniform distribution of smoke, if we talk about the chimney, some masters, the inside of the chimney trim asbestos or glass.

conclusion

These small tricks will enable you to quickly, and most importantly, quality, put a really strong oven. To date, it is very important to keep all the drawings, so if you are designing your own oven, then you need to comply with all the calculations in order to provide themselves with the warmth and comfort of a few years.

Subscribe to my Blog BuilderSo as not to miss an interesting article!

Here are some articles you may like:

Properties of the heating furnace installation

Features installation of a fireplace in country houses

What is the real Russian bath? Reveal the main secret!

What is the smoke sauna? I'll tell you how to prepare such a bath on February 23!