Independently adjust the windows and doors are double-glazed windows?

No house is complete without windows and doors. Increasingly, the old wooden windows, as well as the door is changed to the new plastic. Why? Yes, everything is simple: they are much more comfortable and practical. At the same time use them much easier. So I decided to replace their windows with new and modern. As it turned out, periodically insulating glass windows and doors need to be adjusted. I like a man who had no business with similar problems, initially have any questions. But this task is not as difficult as it seems at first glance. I figured out pretty quickly.

The problems that arise when using windows and doors, are identical and solved the same way. Therefore, to understand with windows, all new skills, I easily moved to the door.

First thing I took - a pen. everything is easy here. I found under the handle of a special plug and gently pulled her to his side. After that, I cranked it a quarter turn, and no special tools, and with his own hands. Otherwise there is a likelihood of damage to the material. Also slightly pulled a pair of bolts under the cap. When the handle is jammed, I just greased it and this problem was solved. To lubricate the pen, you must first remove and clean the vacuum mechanism. I oiled spray with WD-40 liquid, which is useful to me convenient tube. With it you can get to hard to reach places.

Once the handle had to be replaced. This process took a minimum of time: under the cap unscrewed the bolts, carefully removed the handle and put in its place a new one. Screw mounting. Done.

Another important point that I noticed when using insulating glass - a loose pressing of the flaps to the frame. The windows and doors use a special rubber for sound insulation and sealing. Over time, the rubber has lost volume due to which cracks were formed. This problem often arises when the change of seasons. Fortunately, I decided it without any substitutions. Due to the design of windows and doors, cracks can be independently addressed.

Side windows and doors in the slots plugs are small cylinders, which are called pins. Another name that I have met - eccentrics. Across from them, I found the mechanism for which the pins or cams are mounted. in the warmer months, I usually turn the pin in the direction to the room, and when cold weather - in the opposite direction. Thanks to this regulation can achieve maximum tightness.

Perhaps this article will be of interest to you:

What are the wooden windows is better for a country house?

What is the cost to install a standard glazing "turnkey"?

Plastic or metal-plastic windows?