Overview of a two-story bath with terrace. Exterior finish

This object is a bath complex, which was built in 2016. The two-story building, which houses a steam room, shower room, lounge, bathroom and toilet on the ground floor and first floor, technical room with ventilation.
Impressive description, is not it? Let's look at the bath from all sides!

We begin with a basement, which is made of reinforced concrete monolithic insulated plate with reinforcing ribs on the perimeter. A tape under the terrace used with flooded headband. The walls are made of wall material - arbolit blocks. The thickness of the external walls of the bath is 300 mm and the internal partitions 200 mm.

Facade bath made according to the "wet facade" and insulated with mineral wool insulation Rockwoll Fasade Batts, which is deposited on top of the reinforcing layer and the decorative plaster woodworm.
All the windows in the bath Rehau Intelio, profile width with 80 mm. Thanks to all of the above attributes voiced room is a high quality and is able to retain heat for a long time.

The roof of the bath is covered with a soft roof TechnoNICOL Shinglas, which insulation is 200 mm. Along the perimeter of the roof mounted Finnish water drainage system.
Directly located on the terrace of the oven-barbecue from the famous Portuguese manufacturer Percimentos, the choice of which was driven by customer requirements. The furnace is multifunctional. With it you can do barbecue, to cook in a cauldron. Also in its design includes countertop and sink.

Terraces supporting columns are made of laminated veneer lumber section of 150 * 150 mm, the upper rail terraces formed of an identical cross section beams.
terraces cover is made of larch boards, which assembling produce special technological gap.