As the dog tossed me a job. Shiporezka on a real project.

In a previous article I talked about homemade shiporezke.

And this device has helped me to re-do the door for stair railings. Repeatedly, it is because the first door nibbled dog, so it's not a joke: the dog really has thrown me a job.

In the manufacture of doors for all the connections I used this device.

Compared with the first wicket as he did, to make the connection was much more convenient.

First did so: spikes on the circular saw, and nests for them using homemade filler router. Spikes should have been done long, customized with a file under the tongue and the length of the spike a little limp.

Here, once I set up, made all the thorns and then on the same device all the grooves for studs. And then just gathered.

In the manufacture of the gate, I made a simple device for precise positioning of the parts in this device.

The plywood portion of this device is made of a pin nail. The template to drill the hole for him.

When this lining on the template, screws in the upper part is the exact center of the holes in the template.

It should be noted on the workpiece and the stud center combined with the template center and after milling to obtain the desired spike.

With slots the same. Once the template is being used by another.

For greater clarity, I suggest to watch the video.

A work result was as follows:

And let me remind precision manufacturing connections with this device depends on the accuracy of patterns of production.

According to the drawings this device email me at this page.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.