Soundproofing walls and floors in the apartment

Protect premises from penetrating noise from outside - the key to a restful sleep and good mood all the tenants of the apartment. Sound insulation in the apartment It is of particular relevance for thin-wall houses, perfectly impermeable to any sounds. To this trouble would never cause you any trouble, it is worth to do soundproof walls, or to invite for the job of building professionals. In any case, initially it is to determine the order, where there is the source of all ills. If your family regularly annoy her, not too polite behavior are "loud" neighbors who live on the ground floor, it will be sufficient to fulfill the floor insulation.

But if you happen to own an avid music fan and love to practice in the game on a drum kit, you have to work hard here. Completely isolated from the outside noise just will not work. But significantly reduce the level of loud sound coming from your apartment or entering into it, be sure to succeed.

Soundproofing wall materials, having properties protect against high frequency vibrations can be different. The sounds of classical music, who love to listen to your neighbor, be able to successfully extinguish a special sound-insulating material, nailed to the wall. But to cope with overgrown lover 'hot' blockbusters much harder. There will need to build additional wall at some distance from the existing wall surfaces. This gap can be a barrier to the penetration of low-frequency vibrations.

Modern building technologies can significantly reduce the strong level of sound to make life much more comfortable and to maintain health. Soundproofing made using sandwich panels. This material, consisting of reflecting and sound absorbing layers has a different thickness. The feedstock used plasterboard, thin sheets of galvanized steel, as well as mineral wool and its various derivatives. The main thing to remember about the ecology of purchased goods, because it will be installed in the accommodation. Soundproof rooms It begins with a glossing over of all available openings.

The material may be mounted on the wall by two different methods: frameless or framed. In the first case, each tile is glued directly on the surface of the wall. Then it should be sewn using the drywall, and seal the seams. Simple technology mounting method allows to reduce the noise level to 15 dB. The second type of work is done with pre-installation frame made of steel or wood. Left between the wall and the profile small gap is filled with sealant. Further, also as in the first case, the panels are installed, which are then sutured sheets of plasterboard. Soundproofing an apartment with his hands It does not end with the implementation of the above mentioned works.

Quite often it is necessary to sacrifice a few inches of usable space to be isolated from unnecessary sounds floor. In small old apartments for low ceiling height can be reduced even more, therefore it is better to use in this case frame method, and put the cork in the substrate 2 cm thick. This must be done before the screed. In the event that the ceilings are at a considerable height, which can be installed on a support frame in which to lay a suitable sound-insulating material. Then, such a construction is sutured plywood sheets, in which the selected floor covering is laid. In a similar way it is also possible to perform a reliable isolation from noise ceiling coverings.

Thank you for you for reading this article to the end!

In order not to miss new articles subscribe to the channel!

Like put, if this post was helpful to you!