Fixing the membrane to the roof alone. Simple things together that facilitated my work.

What could be easier than to "adjust" to the rafters film??? Oh, how easy it is to talk while sitting on the couch in front of a computer.

Through this, I was going from one phase of its construction.

How easy and simple it seems. Especially when professionals (and not so ...) explained in a variety of video, how and what to do. And so it smoothly they do that every time you think that you, too, everything will go on smoothly. Not once did not work ...

And here is another "easy job of work."

After I finished the basic work with the truss system (I set themselves rafters and lengthened them to the desired size) It's time to close everything.

✅ New important stage - Mount diaphragm kontrobreshetki and crates.

All of this is dressed in the same group, because it is installed, it can be said, simultaneously, or in parallel.

❗ But each of these three components deserves special attention.

Today let's talk about the membrane itself.

About how and why I chose the material that is used, I wrote in this article. It's time for the features of its installation.

As always, much of the work I was doing alone (sometimes helped his wife), so I had to adjust to many things. And that's the main thing I remember:

🟢 membrane light and heavy roll.

It's simple, secured edge is rolled roll of crepe gradually... Why no one talks about is that this roll weighs half a kilo... Similarly, I certainly do not weigh but a few kilograms exactly, and toss and turn with it, very uncomfortable between the rafters.

Therefore, tormented with a single row, I decided to simplify your work.

Who ever hung wallpaper, or cover the greenhouse film will understand what I am 😁.

I just picked up and cut a large roll into several pieces to length

It needs only a free area for that. And get a few rolls of the lungs, which is very easy to operate.

🟡 Wind??? Even the need to breathe quietly.

With the wind of course I was lucky, or rather its absence.

But even small gusts that sometimes flew to me, brought serious problems.

Here the wind blows, sit, hold the membrane and waiting when he gets bored and he will calm down. And no other choice ...

All this of course, again, especially in the work of one person. But look at the weather even need aides, otherwise you can be tormented and do nothing in the end.

🟠 Stapler, is a thing ...

I do not remember where I got this belief that the staples, do not hold anything, but here it was completely destroyed.

Even in the absence of strong winds membrane - a sail that will constantly strive to fly away somewhere. And for him, he will draw all.

✅ But despite this 8 mm clips the edges (but, of course, on each rafters), We kept everything very firmly. At least I managed to safely secure the whole canvas and slowly counter-install.

🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹

EventuallyI can say that you can adapt, but as in all of the construction site, the head should be included, and to act according to the situation.

• But the situation is still coming ...

SUBSCRIBE TO THE CHANNEL and put the Huskies 👍. Newbie continues its work 😎.