Detailed instructions for laying tiles in the bathroom

Ceramic tile is known to mankind for thousands of years. Its excellent properties for the protection of walls against moisture penetration and destruction are used for high-quality durable repairs not only in the bathroom, but also in other areas. Further, it should also be noted visual appeal, design and variety of assortment of color solutions of this wonderful building material.

Laying tiles on the wall in the bathroom - the most common modern method of protection and surface decoration. In order to perform the job, you need to stick to the existing scheme. It consists of the following stages:

· Perform a preliminary count required amount of material. This is done in order to avoid unnecessary additional costs and make a small supply of tiles to the case of marriage. Obmeryayte area of ​​each wall or floor, and then add up all the results. Choose optimally suitable for the tile size 25x30 cm or 27h40 cm, and always keep in mind its purpose.

· High quality of work depends on how smooth are the walls. Conduct a test on the vertical using a spirit level or plumb. Any deviation from the norm should be eliminated. Laying the tiles in the bathroom without additional alignment walls - it is a guarantee that the work will be ruined. Using plaster mixture alignment or installation of a moisture-resistant cardboard can be achieved perfectly smooth walls state.

• Before laying tiles directly held priming walls. To do this, purchase a high-quality primer of deep penetration of the respective destination. Application is performed using a broad brush, roller or spray.

· In general a convenient container mix purchased by the adhesive mixture. It is convenient to do a special drill with paddle-type "beater". Always follow the manufacturer's instructions, which is available on each package. Properly prepared adhesive has an average uniform texture, without the presence of inclusions and other unwanted elements.

· There are several options for laying tiles in the bathroom. In any case, you should always start with the application of the perimeter is strictly horizontal. It will be an excellent reference point for each row of tiles.

· Using a special spatula-comb plot the prepared adhesive mixture directly on the wall. Getting started tiling with its second row, which runs right by the landmark.

· Each subsequent tiles strongly pressed against the wall for a while. Excess glue between the seams immediately removed. It's easy to make a moistened sponge or a knife. The distance between the individual elements and the rows were similar, using special crosses and wedges.

· It is a responsible and serious business - bypassing the existing communications. Instructions for laying tiles in the bathroom says that the best option may be a solution of gypsum or production of the foam boxes. Moisture-proof material is easy enough to give the necessary form. Ready box of drywall installed along a wall or in any desired position, it should be pre-primed. The foam does not require additional treatment.

· The final stage of the construction work is the final smoothing of all joints. It can be carried out only after complete drying of the adhesive. Application prepared in accordance with the manufacturer's instructions, the grouting is done with a rubber spatula. After 15 min. residues grout was removed with a damp, then dry cloth.

Put Like, if you like the article!
Thank you for reading the article to the end!
Subscribe to my RSS feed to keep out new and interesting articles.