Do not dispose of the remains of plastic pipes! Useful homemade Workshop

If after the repair you still have unwanted scraps of plastic pipes, do not rush to get rid of them! Plastic pipe - a durable material that is easy to process, and from it we can make a lot of useful things for the workshop, garage, cottage or garden.

One only has to show a little imagination and even the little piece of plastic will be used. Today I'll show you some simple and useful homemade residues of plastic pipesWhich will find its place in the workshop and be sure to come in handy handyman.

1. The simplest thing you can make out of plastic pipes, it sticks to handle curved surfaces. For this homemade need sandpaper and a tube diameter of 20 or 32 mm. Sandpaper cropped to size, causes the back side of the liquid glue or nails and glue it to the pipe. To sandpaper otlipla not until the glue dries, you can all wrap masking tape. That's all useful device for processing curved surfaces ready!

2. For the following we need a homemade pipe of any length with a diameter of 32 mm. Drill drill holes of different diameters, but not thoroughly. Then take a drill diameter of 8 - 10 mm, and stepping 3 - 4 cm, several drill holes (through only now).

Attached to the wall clips and insert them into the tube. We now have a great place to keep drill bits of various diameters and screwdrivers. I love it when the order in the workshop! For this homemade products can be used in almost any pieces of pipe.

3. But by cutting a small piece of pipe 32 diagonally (at an angle of 40 - 60 degrees) and drilling a drill hole diameter of 10 - 12 mm, it is possible to obtain a good attachment to the drill.

Will only fix any bag at the other end of the tube with masking tape and a device for the collection of dust is ready! Now, when you will need to drill a hole in the wall for mounting, the dust will not scatter in different directions, and will be collected in a bag.

4. If you have leftover sewer pipe diameter of 50 mm, one of them can make a simple home-made, which will occupy a worthy place in your workshop. Cut tube at 45 - 60 degrees into pieces of 8 - 12 cm.

And simply attach them to the wall close to each other by means of screws. Thus we get a kind of organizer, which can hold nails, various tubes of glue, crayons or markers, and even some tools, such as glue gun. In my case, the organizer came up perfectly for my jars with Kohler. A cutting and fix in the same way a tube diameter of 75 mm, you will be able to store cans of paint or varnish.

5. 50 pipe can be another useful home-made, which is useful for any handyman. Take the residue pipe length 8 - 12 cm, and cut it so that the top (4 - 6 cm) remained flat portion. On the reverse side will do a little "reed" using grinders or knife stationery.

Our home-made ready! Now you have a handy holder for a hammer, which can be attached to a belt. And inserting a plug holder, you can put in it the nails. By the way, as the plug is installed directly into the pipe, rather than in her mouth, I said in the article about tube electrode.