How to install a fence, Rabitz? Part 2
Now we can talk about the process of installing the fence itself.
This issue did not require high expertise. Installation of the fence is quite simple and is available every last owner.
What operations are included in the installation process of the fence of mesh netting?
Before this - setting the posts, then the installation log and attaching the mesh itself. It is necessary to dig a pit depth of up to 0.5 meters for mounting pillars. After loading the poles, pour concrete pit solution.
We must not forget that the first set of columns at the extreme area, and only then with a certain pitch to arrange the rest between the pillars. It should be noted that when performing these operations can not forget that posts should be strictly vertical. Otherwise, they will skew over time. That's just for this and there is a level that does not allow you to make fatal mistakes when installing the assembly.
Then drill holes in the pillars and joists. Rolled metal secured with bolts and nuts. If there is at hand welding machine, the process is greatly simplified. Then we gently unwinds a roll of wire and attach it to the first aluminum wire extreme pole. This work is carried out with an assistant to quickly and accurately complete all required operations on installation grid. You with your assistant carefully unwinding roll and fasten the upper end to the upper lag. Then we fasten the lower end of the grid with wire or plastic clips. But the most important thing in all of this process lies in the fact that the net is firmly rested on the pillars, and would be well stretched.
Thank you for reading the article until the end.
Put Like if you enjoyed the article!
Subscribe to my RSS feed, so as not to miss a new article!