How to wood sculpture, if you are not an artist
I was always attracted to things carved out of wood, but where is not enough vision, somewhere patience and cutters, I never learned to cut it.
When I became interested in the jig sawing machine, I found that it can be used simply to make molds for small sculptures. Coming up with a small, followed by treatment with, or even without it, getting quite attractive small wooden sculptures.
This template swan found on the net. If interested, here is the link.
Templates for cutting these figures are pasted on the two sides of the bar. This profile is often full face and figure, and sometimes profile and a top view.
Further preform turns transparent tape. First sawed with one hand.
Then again, the bar turns into a transparent adhesive tape to secure the Shape the piece. Further sawed from the second side.
Vypilivaya this pattern seemed to me a fine foot, and I was a bit moved away from the original contour to increase the thickness.
The result had been here such a hare (or rabbit ..)
In the future, with the help of nazhdachki I flattened shape of this figure.
There are models that require more than improvements, such as a crocodile.
After cutting out he needs to trim some parts of it to be really similar to a crocodile.
And after a little processing are obtained here are the figures.
And if you process more thoroughly after cutting out, trying to make the shape more smooth, you get a pretty attractive wooden things. And they may well decorate the interior.
Recently finished doing a few seals which now adorn my desktop, secretary, by the way, I wrote about it here.
Material Manchurian nut. Made using jigsaw machine according to the method described above. Grinding fine-tuned with the help of Now this homemade.
A method of working, and templates can be found on the Internet, such as the link that have a swan.
Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.
Alexander.