Simple scratchbuild of plastic pipes and ropes. An apparatus for carrying wood

Hello! Today, I propose to make a functional and very simple home-made from scraps of plastic pipe and rope on manufacturing which will take no more than 5 minutes! This homemade uniquely useful in the economy and will greatly simplify your work.

For home-made device best suited plastic pipe diameter of 32 mm, but can use a tube diameter of 25 or 20 mm.

At the beginning of a tape measure out the length of 25 - 35 cm and put a label marker or a simple pencil.

We saw off the excess part of the metal saw, grinder or nylon thread.

Now it is necessary to drill two holes in the ends of the tube, departing from the edge 2-3 cm. Take a drill diameter of 8 - 12 mm, depending on the diameter of the rope.

Now we need any sturdy rope or cord length of 3 - 4 m. It is possible to use a clothesline. In my case, I used a polypropylene cord diameter of 6 mm. One meter of the cord is worth a total of 8 - 10 rubles.

The ends of the rope is desirable oplavit lighter so that it is not dissolved.

When all the parts are ready, we begin to assemble the structure. Fold the rope in half and insert the ends into the tube.

Next, tie knots, the rope could not slip through the hole.

All useful device is ready! As a result, we've got a device for carrying wood, veneer sheets, and other materials having large dimensions and that it is not convenient to clasp hands. If you take the rope tighter and attaching the second handle, it is possible to carry bulk cargo together, such as furniture.