How to cut exactly with the help of grinders: a simple complement their own hands

I think every master once in my life there was a need to cut exactly board, plywood or some other fabric.

In this review, I'll introduce you to the amazing invention that can be made with your own hands. (How does this work will show at the end)

**Tool for smooth cutting with a grinder with his own hands**

To commit this simple at first glance, the manipulation had to take square with a pencil, spending a lot of time on the layout and double-check the measurements, and the result is sometimes not at all pleased. But the fact that the author suggested, I was really surprised by its simplicity and efficiency.

Today in the review, we detail consider tool for smooth cutting grinder and give him a proper assessment.

Idea

Grade 5 of 5

As mentioned above, many masters often have to cut a board or cut to size the various canvases. Do it accurately and precisely the first time not everyone can. A special woodworking machine is not at all.

Partitioning of the metal tube, which acts as a preform to create a tool with his hands

instagram viewer

Therefore, the most affordable and simple tool for marking fabric is square and pencil. However, this skill works enough at once, but the risk of spoiling the canvas is always present.

The author also offers a relatively easy way to make with their hands Tool for smooth cutting with a grinder. And it's a great idea!

Design

Evaluation 4 of 5

The tool fairly simple to perform. It is a guide to the limiter, which during cutting is put over the edge of the board and allows you to make a smooth cut without pre-marking.

The process of drilling holes in a metal tube

The guide is made of hollow aluminum tubes of circular cross section, along the entire length at the same distance from each other are drilled through holes.

To one end of the guide author welded metal bracket size grinders, with the help of the brackets and screws to attach the whole structure to the grinder. The limiter is a t-shaped structure welded aluminum tubes of square cross section.

The upper part limiter drilled hole, the guide is inserted into the stopper and is secured by a bolt to the desired distance.

The assembly of preforms into a unified kostruktsii

The design of this tool is very simple and allows you to smoothly cut the board, but at the same time master limited by the size of the holes drilled in the guide. So I put the author of 4 points.

Design

Grade 5 of 5

Author dyed product, so it looks quite decent.

The final type of tool for a smooth cut using a grinder with his own hands

analogs

Grade 5 of 5

Analogues of this device I have not seen. Of course there are professional woodworking machines, which can be perfectly flat to saw a board in a matter of seconds, but to allow them to buy units can.

Total

Grade 19 20

Tool for smooth cutting with a grinder their own hands gaining 19 out of 20 points. It should be noted that it is worthy, and it can take its rightful place among the instruments.