Useful content

Simple and useful homemade plywood and plastic containers. The idea for the workshop

click fraud protection

Hello everybody! Today I will share with you a simple and useful homebrew twig from a plastic container and plywood, which is sure to come in handy in the studio, the garage or at the cottage!

Plastic container
Plastic container

Recently wife bought a whole bunch of plastic containers in store to store its melochovki. Containers quite voluminous (500 mL), made of hard plastic, and most importantly they are transparent, so I just put them on the eyes and took a few pieces myself.

Of these, I decided to make a handy organizer for his workshop, which has long nurtured the idea in his head. The construction of the organizer is very simple and it can be repeated each.

For this homemade except containers still need small pieces of plywood. I just left a few scraps after repair.

plywood scraps
plywood scraps

All you need three pieces of equal length. The width should be selected according to the size of plastic containers. In my case it turned such dimensions: two pieces of 16 by 34 cm, and the third - 9 to 34 cm.

The third piece (smaller width) is still set aside. Primarily I made by counting the width of the workpiece under the top edges of containers - strip 13 mm wide, every 6 cm, departing from the 2 cm edge, draw a line on the whole length of the future part. In the end everything will be much clearer.

instagram viewer

Marking the future organizer details
Marking the future organizer details

To save time and do not make the same markings on the second part, I put two identical pieces together and squeezed them with clamps. Then, using a jigsaw cut out the marked strips.

cut out the strips spaced at two blanks
cut out the strips spaced at two blanks

Received two identical blanks, similar to a large comb.

When all the parts were ready, well-polished them with sandpaper.

Then proceeded to assemble the entire structure. Using adhesive parts connected and fixed clamps them.

assembly of structures made of plywood
assembly of structures made of plywood
assembly of structures made of plywood

Then further on the sides of all the efforts screws, holes have been drilled in advance to plywood are not stratified.

After 20 minutes, a useful homemade was ready! It remains to fasten the resulting construct to the wall of his studio, and insert plastic containers. I really liked the result, because as it turned out, we got a very practical and convenient organizer! This idea is very much not only to me but also to my wife. Well, now she will have to make such a personal organizer. By the way, for this homemade as suitable plastic containers of various foods.

simple and useful home-made out of plastic containers and plywood
simple and useful home-made out of plastic containers and plywood
organizer for the workshop with their own hands
simple and useful home-made out of plastic containers and plywood
simple and useful home-made out of plastic containers and plywood
Why wilt petunia. How to fix

Why wilt petunia. How to fix

Wilting leaves and buds petunia cause 4 reasons. Remedy the situation, you return ornamental plan...

Read More

Onion husks for the garden

Onion husks for the garden

Onion peel - undeservedly forgotten "Grandma" folk remedy in the care of cultivated plants in the...

Read More

White plaque on the beds - a danger signal

White plaque on the beds - a danger signal

We noticed that the ground on a bed covered with white bloom? We need to take immediate action! T...

Read More

Instagram story viewer